Skinner Sights Aperture/Peep for TC Contender and Encore

[SkinnerSights]

Skinner Sights now has a fully adjustable aperture / Peep sight for Contender Carbines and Encore Rifles.

We machine these from solid barstock and they are available in Blue and Stainless.

Please check them out!  http://www.skinnersights.com/thompson_center_19.html

Any questions please contact me via the websight.  www.skinnersights.com

Andy

[244Ack]

Are these available anyware in Canada?

[Camp Cook]

I don't think so but from what I understand Skinner Sights will ship direct to us and yes I am looking at giving one a try on a Contender carbine barrel.

[SkinnerSights]

Hi 244 Ack...

Interestingly enough...  I have a 244 Ack. Imp. in a TCR single shot.  What a neat rifle.

I'll send to you in Canada.  Order via www.skinnersights.com

THANKS

ANDY

[244Ack]

Hi Andy, thanks for the reply. Ill do an order next week when I get out of camp. The "net Nanny" at work won't let me get on your website.

244Ack

[jobyjob]

I want something like this for my Thompson Impact. Does your peep sight work with the Williams Fiber Optic front sight that came standard on my Impact?

Thank you in advance for your reply.

Mark

[SkinnerSights]

Hi Joby,

If the hole spacing is the same as what TC uses for the Contender and Encore, then yes, this sight will fit your rifle.

I'm not sure about the front sight, possibly...    The center of the aperture sits approx. .375" above the top of the barrel where it mounts.  Measure the height of the notch in the factory rear sight and see how close that is.  That would be a good way to get an idea if it will work or not.

Hope that helps!

Andy

[luckydawg13]

do these work on a 12GA encore shotgun barrel
will they work in low light

[SkinnerSights]

The Skinner Encore Sight will work on any Encore / Contender / or  Muzzle Loader that is drilled and tapped for the standard Thompson Center hole spacing.  Almost every TC is drilled and tapped for our sight.

Yes it will work on the Shotgun barrel if it has those same sight mounting holes.  (4 holes on top of the barrel just over the breech end of the barrel)

For low light remove the aperture for a .200" dia. "Ghost Ring".  It works GREAT.

Thanks for asking!

ANDY