Author Topic: converting .303 savage (Read 620 times)

CJ · « **on:** December 30, 2003, 07:36:58 AM »

Been trying to find .303 savage brass or ammo without mortgaging the house. I only have 1 box to feed my 99. I hit several small out of the way stores in my area hopeing to find a dusty box on the shelf at the old price. Two shopowners tried to prove theres no such animal by looking for it in current catalogs {its not loaded anymore} and then tried patiently to explain what I wanted was .303Brit or .300savage. I now figure I'll have to make my own. Looking on the internet, seems people are making it from .220swift brass, but not HOW. Loking at the specs, seems 30/30 brass would be a better start. I reload a lot, but my only case forming experience is feeding my .358win with necked up .308win brass, basic conversion. Anyone has any tips, tricks, or ideas I'd sure appreciate hearing them. Thanks in advance.

Graycg · « **Reply #1 on:** December 30, 2003, 08:00:29 AM »

You may want to contact Dangerous Dave at the old western scrounger, I believe he as ammo that you could buy and use the brass for reloading.

regards,
graycg

CJ · « **Reply #2 on:** December 30, 2003, 08:21:15 AM »

I sent someone a link for OWS for .348 brass recently, looked for .303sav while I was on the site, no listing. Haven't called though. Ebay has some brass, $100 for 100 cases and still bidding. Couple of outfits custom loading for it, around $40 a box. I'm hopeing Winchester will take pity and make a special run sometime soon. Thanks for the quick reply.

Blackhawk44 · « **Reply #3 on:** December 30, 2003, 01:00:21 PM »

You just need to visit the nice folks at Buffalo Arms Co. They have more options for you than can be imagined. http://www.buffaloarms.com/browse.cfm/4,108.html

savageT · « **Reply #4 on:** December 30, 2003, 01:16:31 PM »

Quote from: CJ

Been trying to find .303 savage brass or ammo without mortgaging the house. I only have 1 box to feed my 99. I hit several small out of the way stores in my area hopeing to find a dusty box on the shelf at the old price. Two shopowners tried to prove theres no such animal by looking for it in current catalogs {its not loaded anymore} and then tried patiently to explain what I wanted was .303Brit or .300savage. I now figure I'll have to make my own. Looking on the internet, seems people are making it from .220swift brass, but not HOW. Loking at the specs, seems 30/30 brass would be a better start. I reload a lot, but my only case forming experience is feeding my .358win with necked up .308win brass, basic conversion. Anyone has any tips, tricks, or ideas I'd sure appreciate hearing them. Thanks in advance.

http://www.auctionarms.com/search/displayitem.cfm?itemnum=5326464
Box of 20 Silvertips 190gr.

Jim

Blackhawk44 · « **Reply #5 on:** December 30, 2003, 01:35:08 PM »

...and they want a $50 starting bid!!! For shooting???

savageT · « **Reply #6 on:** December 30, 2003, 01:42:16 PM »

Yep.....that's the going price!

Jim

Blackhawk44 · « **Reply #7 on:** December 30, 2003, 02:22:15 PM »

Buffalo has both reformed and Bertram brass, dies, bullets, molds...whatever you need. Some brass for about $.85 per case...

CJ · « **Reply #8 on:** December 30, 2003, 05:25:02 PM »

savageT, saw that before, got a chuckle. Little too step for a workin guy. Blackhawk, I may have to give Buffalo a call. Wonder how I never heard of them before? Still interested in forming cases though. Thanks to all.

ricciardelli · « **Reply #9 on:** December 30, 2003, 09:04:31 PM »

Bertram brass, around $125 per 100

savageT · « **Reply #10 on:** December 30, 2003, 11:39:30 PM »

The folks over on 24Hour Campfire-Savage Forum have discussed this issue till the cows come home.........Here's the best info to re-form cases I've read about using .220 Swift brass. You might want to do a search for .303 sav brass over there and/or contact <rooster106@yahoo.com>.

Jim