Author Topic: remington 1100 LT20 3" magnum barrell too shoot low brass shells?  (Read 1606 times)

0 Members and 1 Guest are viewing this topic.

Offline kevin oh

  • Trade Count: (0)
  • Member
  • *
  • Posts: 50
what can i do to get my remington 1100 LT20 3" magnum barrel too shoot low brass shells and kick them out right

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: remington 1100 LT20 3" magnum barrell too shoot low brass shells?
« Reply #1 on: May 03, 2011, 09:06:45 PM »
There is no sure way. Remington says that it is OK to shoot that ammo but the gun may not function.. Most 12 guage mags will work with lighter loads but usually not with the lightest.. Clean the gun and lubricate it well will help but there is no guaranteed fix. Except!! Buy a 2 3/4 inch chambered barrel for the LT. Then all will be well. This was the biggest problem solved by the 1187..as it will function with either length shell.. Be careful Remington made 3 different 20 guage guns, standard 20, LT 20 guage and the Special Fields...
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline Luckyducker

  • Trade Count: (5)
  • A Real Regular
  • ****
  • Posts: 645
Re: remington 1100 LT20 3" magnum barrell too shoot low brass shells?
« Reply #2 on: May 04, 2011, 03:21:08 PM »
I had an LT20 Magnum (oldest son has it now) and if I kept the gas port in the barrel clean it would shoot and cycle low brass, but as stated no guarantees.

Offline kevin oh

  • Trade Count: (0)
  • Member
  • *
  • Posts: 50
Re: remington 1100 LT20 3" magnum barrell too shoot low brass shells?
« Reply #3 on: May 04, 2011, 07:46:55 PM »
thanks for the information