Author Topic: Finding a "K" tank for BBM  (Read 791 times)

0 Members and 1 Guest are viewing this topic.

Offline partsproduction

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
Finding a "K" tank for BBM
« on: August 06, 2012, 11:21:51 AM »
  I just called a company that tests and rejects tanks, asking for a "K" tank, the guy asked pointed questions about the end use, and when I was honest he said they wouldn't sell me one! Said if I wanted one for a bell maybe. I don't believe in lying for any reason , so I don't know what to do next. Anyone have any ideas?
Thanks,
parts

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: Finding a "K" tank for BBM
« Reply #1 on: August 06, 2012, 11:57:51 AM »
Sometimes absolute honesty is not the best policy; tell them you are looking for some for wind chimes.  It would probably be a good idea to take several of differing sizes to reinforce this idea.
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”
--Winston Churchill

Offline flagman1776

  • GBO Supporter
  • Trade Count: (3)
  • A Real Regular
  • *****
  • Posts: 795
  • Gender: Male
Re: Finding a "K" tank for BBM
« Reply #2 on: August 06, 2012, 01:48:45 PM »
Then tell hm you want to make a bell.

Offline Artilleryman

  • Moderator
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1378
Re: Finding a "K" tank for BBM
« Reply #3 on: August 06, 2012, 02:05:08 PM »
I know that bronze coehorns ring like a bell when shot, well at any rate they ring.  Do BB mortars ring when fired?
Norm Gibson, 1st SC Vol., ACWSA

Offline GGaskill

  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 5668
  • Gender: Male
Re: Finding a "K" tank for BBM
« Reply #4 on: August 06, 2012, 06:47:05 PM »
I haven't noticed it but mine is mounted like an M1861 mortar with side trunnions which would damp any ringing.
GG
“If you're not a liberal at 20, you have no heart; if you're not a conservative at 40, you have no brain.”
--Winston Churchill

Offline armorer77

  • GBO Sponsor
  • Trade Count: (8)
  • A Real Regular
  • ****
  • Posts: 541
  • Gender: Male
Re: Finding a "K" tank for BBM
« Reply #5 on: August 06, 2012, 09:39:35 PM »
My BB mortar rings for at least 10 seconds after each shot , nice tone too .

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12608
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Finding a "K" tank for BBM
« Reply #6 on: August 07, 2012, 12:34:28 AM »

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12608
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Finding a "K" tank for BBM
« Reply #7 on: August 07, 2012, 12:36:13 AM »
  I just called a company that tests and rejects tanks, asking for a "K" tank, the guy asked pointed questions about the end use, and when I was honest he said they wouldn't sell me one! Said if I wanted one for a bell maybe. I don't believe in lying for any reason , so I don't know what to do next. Anyone have any ideas?
Thanks,
parts

Find something else to make a barrel out of.  Southpaw did, I am am.

Offline flagman1776

  • GBO Supporter
  • Trade Count: (3)
  • A Real Regular
  • *****
  • Posts: 795
  • Gender: Male
Re: Finding a "K" tank for BBM
« Reply #8 on: August 07, 2012, 02:39:53 AM »
Do you need a "straw purchaser" to buy scrap steel tanks?   

Offline partsproduction

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
Re: Finding a "K" tank for BBM
« Reply #9 on: August 07, 2012, 02:20:44 PM »
 I need a straw purchaser now, I can't get imaginative with the truth now and be believed. I'll pay $100 plus whatever they want for two tanks. I drive scrap copper from our primary products up to Portland every two weeks, and could pick one up then. Please PM me if you can help. The advantage of the tanks is weight, they are relatively light and designed for pressure.
 
 In my business time is money, and paring down shelby or whatever else I can make a tube out of, so that it's light enough, will take lots of time.

 It seems to me that the K cylinder is the best compromise for me.

Offline smokemjoe

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 237
Re: Finding a "K" tank for BBM
« Reply #10 on: August 07, 2012, 02:49:31 PM »
  I paid $15.00 for a reject but also 4 cases of beer.  Got it  off the delivery truck, Got 2 mortars from one tank.Your need  the DOT AA2400 tank

Offline flagman1776

  • GBO Supporter
  • Trade Count: (3)
  • A Real Regular
  • *****
  • Posts: 795
  • Gender: Male
Re: Finding a "K" tank for BBM
« Reply #11 on: August 08, 2012, 04:27:20 AM »
Another source might be a scrap yard where the condemned tanks get sent.  I have seen some locally when I've dropped off stuff.  Let them know what you are looking for & leave a number.