« previous next »
Pages: [1]   Go Down

Author Topic: Selecting Projectiles for my 45 cal  (Read 699 times)

0 Members and 1 Guest are viewing this topic.

Offline AtlLaw

  • Moderators
  • Trade Count: (58)
  • Senior Member
  • *****
  • Posts: 6405
  • Gender: Male
  • A good woman, nice bike and fine guns!
Selecting Projectiles for my 45 cal
« on: August 09, 2011, 08:49:57 AM »
Since I got my first ever in-line nice and tight and ready to shoot, I've been thinking about projectiles.
 
Gonna get some .440 balls, but I wouldn't hunt deer with them...   :-\
Gonna get some sabots and try jacketed pistol bullets... someday...  :-\  Oh!  thanks to BakerBeans for his offer to send me some!   ;)
 
But I got to thinking...  ::)  If this thing will shoot pistol bullets in sabots, and it will shoot a patched round ball, why wouldn't it shoot a patched pistol bullet?   :P
 
I've got a RCBS 240 gr. Keith mould and a RCBS 250 gr. RNFP mould so I cast a few of each.  Scratch the 452's; to hard to load.  The as cast .433's on the other hand were nice and tight with a .010 patch.  Almost to tight with the folds caused by the material lapping over itself.   :-\
 
So I says to myself, self... if you cut 4 notches in the patch...  So I did!   :)  Lo and behold, what I ended up with looks like a sabot made out of patch material!  and it covers the Keith right to the top of the upper driving band!
 
So next range trip I'm ready with a bunch of bullets and patches lubed with my (Gatofeo's) BP lube!
 
I love 'sperimenting!   ;D
Logged
Richard
Former Captain of Horse, keeper of the peace and interpreter of statute.  Currently a Gentleman of leisure.
Nemo me impune lacessit

                      
Support your local US Military Vets Motorcycle Club

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Selecting Projectiles for my 45 cal
« Reply #1 on: August 09, 2011, 10:44:12 AM »
Richard,
 
Somebody awhile back was shooting 44 cal cast pistol bullets with a patch in a 45-70 converted to muzzleloader.  I can't remember who it was and I ain't smart enough to search and find out.  The palm of my right hand still hurts from 15 years of pounding patched roundballs down my 50 cal DB so I ain't goin' there again. Good luck at the range!
 
BB
 
PS:  90 grains of BH209 and a 385 grain conical in a 45 cal inline MZ constitutes a "stiff" load. :o   
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline AtlLaw

  • Moderators
  • Trade Count: (58)
  • Senior Member
  • *****
  • Posts: 6405
  • Gender: Male
  • A good woman, nice bike and fine guns!
Re: Selecting Projectiles for my 45 cal
« Reply #2 on: August 09, 2011, 12:12:59 PM »
Quote from: bikerbeans on August 09, 2011, 10:44:12 AM
my right hand still hurts from 15 years of pounding patched roundballs down my 50 cal DB

 ;D   I know what you mean Tom.  I grew up abusin my right hand!  Uh, wait...  :-\   That's not what...  ???   ...  :-[   Nevermind...  :-X
 
Quote
PS:  90 grains of BH209 and a 385 grain conical in a 45 cal inline MZ constitutes a "stiff" load. :o

Well, I was goin to start with 80 gr. FFG behind the 240 gr.  That should be real safe!   ;D
Logged
Richard
Former Captain of Horse, keeper of the peace and interpreter of statute.  Currently a Gentleman of leisure.
Nemo me impune lacessit

                      
Support your local US Military Vets Motorcycle Club

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: Selecting Projectiles for my 45 cal
« Reply #3 on: August 09, 2011, 02:18:40 PM »
Quote from: AtlLaw on August 09, 2011, 12:12:59 PM
Quote from: bikerbeans on August 09, 2011, 10:44:12 AM
my right hand still hurts from 15 years of pounding patched roundballs down my 50 cal DB

 ;D   I know what you mean Tom.  I grew up abusin my right hand!  Uh, wait...  :-\   That's not what...  ???   ...  :-[   Nevermind...  :-X
 



Now, now, get that mind outta the gutter!  :o ;)
Logged
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.
Pages: [1]   Go Up
« previous next »