Author Topic: Anyone use 7mm-08 for Rifle Silhouettes?  (Read 4149 times)

0 Members and 1 Guest are viewing this topic.

Offline Steve P

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 1733
  • Gender: Male
Anyone use 7mm-08 for Rifle Silhouettes?
« on: November 30, 2009, 09:22:25 AM »
I just picked up a 7mm-08 for hunting.  I am working up a hunting load and was thinking this would be a fun rifle to play 500 meter silhouettes at our yearly 500m pistol match. 

Anyone use the 7mm-08 for silhouette?  Favorite loads?  I will shoot 200 meter chickens standing and everything from 350 on with my shooting sticks so I am basically practicing my hunting posture.  I don't want to use my Nosler Partitions for silhouette so would appreciate any silhouette loads that work for you.  Bullet weight and velocity?  Powder?

Steve :)
"Life is a play before an audience of One.  When your play is over, will your audience stand and applaude, or stay seated and cry?"  SP 2002

Offline drags

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 197
Re: Anyone use 7mm-08 for Rifle Silhouettes?
« Reply #1 on: December 04, 2009, 03:28:57 AM »
Steve, for the c,p,t I use the 130 gr smk for the rams I use the 168 gr smk and I use varget powder in all bullet weights. Velocity in the 2500 fps range is good maybe 2600 for the 130 gr bullet.
Drags

Offline Steve P

  • Trade Count: (10)
  • Senior Member
  • *****
  • Posts: 1733
  • Gender: Male
Re: Anyone use 7mm-08 for Rifle Silhouettes?
« Reply #2 on: December 04, 2009, 08:35:48 AM »
Thanks for the info.  I have some Varget and H414 on my bench ready to weight out a few loads.

Steve :)
"Life is a play before an audience of One.  When your play is over, will your audience stand and applaude, or stay seated and cry?"  SP 2002

Offline Arizona Jake

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 271
Re: Anyone use 7mm-08 for Rifle Silhouettes?
« Reply #3 on: December 05, 2009, 07:56:47 AM »
I use around 36 grains of Varget for 139-140 grain bullets for C, P & T, with a muzzle velocity around 2,500 fps and 40.5 grains of Varget with Sierra 168 HPBT's for the rams at 500 meters, with a muzzle velocity of about 2,550 fps.

Both loads are easy on the shoulder and have yet to leave anything hit standing.
Joaquin B.:cb2:

Offline CIG

  • Trade Count: (0)
  • Member
  • *
  • Posts: 77
Re: Anyone use 7mm-08 for Rifle Silhouettes?
« Reply #4 on: June 02, 2010, 06:54:13 AM »
I have a Mauser action with Sihlen barrel and Fajen stock with a Jard trigger in 7-08.  I load 34 grains of IMR 4064 with 162 grain Hornady A-max's.  I use it on everything and it never left anything hit.  I hit rams in the foot and they went over.  It shot equally well with 36 grains of powder but I went with less recoil. 

I was using 120 grain Hornady V-max, with 41 grains of Varget.  Shot a lot flatter, but with more recoil.  Saw no reason to continue using it.  Shot chickens and pigs with that load. 

I used to use a .270 win.  I like this a lot better. 

Offline drags

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 197
Re: Anyone use 7mm-08 for Rifle Silhouettes?
« Reply #5 on: June 08, 2010, 02:54:59 PM »
cig: I have shot the 162 Amax bullet in my 7br and it shot very well on paper but I never used it on rams. I did use the hornady 162 sst on rams and I rung some of them so I assumed the 162 Amax would ring rams also, it's good to here that the 162Amax takes down the rams reliably. My current ram bullet is the 168smk and it does very well on rams.
Drags

Offline siloram

  • Trade Count: (0)
  • Member
  • *
  • Posts: 15
Re: Anyone use 7mm-08 for Rifle Silhouettes?
« Reply #6 on: June 20, 2010, 07:10:06 AM »
I have been trying the 175 gr. Sierra Match in my 7-08 with
Varget on the rams. I have a Krieger barrel with a 1-8 twist. So far no dings on rams.
Siloram

Offline trkyman1

  • Trade Count: (7)
  • Avid Poster
  • **
  • Posts: 154
Re: Anyone use 7mm-08 for Rifle Silhouettes?
« Reply #7 on: July 02, 2010, 06:28:54 AM »
I have used the hornady 139gr btsp. over win 748 for all targets and they work great. I know this seems light for the rams but they do work better than expected.

Offline 41 magnum

  • Trade Count: (28)
  • Avid Poster
  • **
  • Posts: 220
  • Gender: Male
Re: Anyone use 7mm-08 for Rifle Silhouettes?
« Reply #8 on: November 25, 2011, 02:01:51 AM »
I used a 7-08 back in the 80's when it was a wildcat and loved it compared to the '06 I had been using
 
borrowed rifle and ammo, so can't help there
 
glad to hear it is still alive in Silhouettes
THE 10 COMMANDMENTS ARE NOT SUGGESTIONS

Maker of trappers tools and gear, have an idea?  Let's talk !