« previous next »
Pages: [1]   Go Down

Author Topic: All Handi's drilled/tapped the same?  (Read 417 times)

0 Members and 1 Guest are viewing this topic.

Offline BUTCHER45

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 201
All Handi's drilled/tapped the same?
« on: October 21, 2011, 11:23:09 AM »
I'm calling around the local shops to pick-up some mounts/rings for a 30/30 HandiRifle with an SB2 frame.  One shops says they have a base for the Handi Rifle Topper........will this base work on my SB2 NH###### frame?

Thanks in advance everyone.....this forum is quite impressive!
Logged
click here for.45caliberAirgun slideshow

Offline Jason F

  • Trade Count: (261)
  • Senior Member
  • *****
  • Posts: 2105
  • Gender: Male
Re: All Handi's drilled/tapped the same?
« Reply #1 on: October 21, 2011, 11:28:43 AM »
As far as I know they are all the same mounting holes some have more slots than others for the mounts
Logged
handi rifles- 22 mag      22 hornet    223      7mm-08      308 chip shot     30-30 x2     30-06 shorty      358 cheez whiz     357 max     35 remington     375-08    410 rifled slug     454 casull     460 s&w     45 smokeless muzzleloader x2     45-70    50 huntsman    50-70 government shikari     20 ga.ush     12 ga.ush    12 ga.3 1/2     10 ga.imp.cyl. slug gun

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: All Handi's drilled/tapped the same?
« Reply #2 on: October 21, 2011, 01:19:31 PM »
Yes, BUT the early barrels where a different diameter and require a different base...
 
CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline Winter Hawk

  • Trade Count: (47)
  • Senior Member
  • *****
  • Posts: 1947
  • Gender: Male
Re: All Handi's drilled/tapped the same?
« Reply #3 on: October 21, 2011, 05:38:11 PM »
I'm not so sure.  I had a .30-30 H&R which I bought in 1982 and I had to have one hole drilled & tapped to mount a Marble's peep sight, but I don't remember why....

-WH-

Quote from: Jason F on October 21, 2011, 11:28:43 AM
As far as I know they are all the same mounting holes

Logged
"All you need for happiness is a good gun, a good horse and a good wife." - D. Boone

Offline slngblde

  • Trade Count: (5)
  • Avid Poster
  • **
  • Posts: 180
  • 3 miles north of Joe s
Re: All Handi's drilled/tapped the same?
« Reply #4 on: October 21, 2011, 08:17:51 PM »
I have an extra factory base that's new, I needed a hammer extension and the only way to get one locally was to buy the package with both. Pm me if interested.
Logged
Pages: [1]   Go Up
« previous next »