« previous next »
Pages: [1]   Go Down

Author Topic: 58 load info  (Read 494 times)

0 Members and 1 Guest are viewing this topic.

Offline scratchmark

  • Trade Count: (90)
  • A Real Regular
  • ****
  • Posts: 751
58 load info
« on: October 09, 2011, 03:29:13 PM »
I've got a 1971 58 cal. Huntsman with o-ring breach plug and was wondering if anyone had any good load info to share. Was thinkin bout 90 grs. Pyrodex behind a saboted 250 gr xtp at .452
Logged
If the women don't find ya handsome, they should atleast find ya handi

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • Moderator
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Re: 58 load info
« Reply #1 on: October 10, 2011, 08:36:27 AM »
Not saying that you can not get those to work but with mine I have found the full bore slugs and patched ball work better with the 1-66 twist. I use 350 gr and up60-90gr FFg powder. 90gr and 460 slug gives quite a thud but works well. Kurt
Logged
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"

Offline eod20

  • Trade Count: (4)
  • Avid Poster
  • **
  • Posts: 228
  • Gender: Male
  • stinker
Re: 58 load info
« Reply #2 on: October 10, 2011, 03:31:46 PM »
   i use 75gr of triple 7 and a full bore 560 gr soft lead minnie with a nice wide meplat
Logged
looking for ejectors - 308, 8mm, 35 rem, 25-20, 32-20, 357 mag, 45LC

Offline topper88

  • Trade Count: (5)
  • Member
  • *
  • Posts: 65
Re: 58 load info
« Reply #3 on: October 14, 2011, 06:38:22 AM »
I tried 250 gr. in a sabot.  No luck.  Would not stabilize.  Went back to patched round ball which makes cloverleafs at 50 yds. with 70 grains of Triple Seven.   If I use one of them old plastic round ball patches I can go up another 10 grains with out blowing the plastic patch for same accuracy.  I am meaning to try some lighter Minnies in the 300-400 grain range some day but I only put it on the frame once a year to shoot it.  Beautiful light barrel you can carry all day.
Logged
Pages: [1]   Go Up
« previous next »