« previous next »
Pages: 1 [2]   Go Down

Author Topic: powder spray  (Read 1151 times)

0 Members and 2 Guests are viewing this topic.

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: powder spray
« Reply #30 on: October 06, 2011, 02:18:32 AM »
If the gun is touching anything other than your hand that could cause accy. problems.
Logged
If ya can see it ya can hit it !

Offline DANNY-L

  • GBO Supporter
  • Trade Count: (63)
  • Senior Member
  • *****
  • Posts: 1084
  • Gender: Male
Re: powder spray
« Reply #31 on: October 06, 2011, 03:28:05 AM »
And I was resting it on the base just in front of the trigger guard.Will try it again when it warms up a bit,34 degrees right now.
Logged

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: powder spray
« Reply #32 on: October 06, 2011, 03:49:23 AM »
Rest your fore arms on something and don't let gun touch anything but hands.
Also it might be interesting to rotate your bbl and see if its position makes a difference as to indexing with cyl. I doubt it but it might .
Logged
If ya can see it ya can hit it !

Offline DANNY-L

  • GBO Supporter
  • Trade Count: (63)
  • Senior Member
  • *****
  • Posts: 1084
  • Gender: Male
Re: powder spray
« Reply #33 on: October 06, 2011, 04:49:26 AM »
I will do that,on another note while seating my bullets I need to make them about longer to be able to crimp into the canelure,and the brass is trimmed to 1.600,is it safe to trm shorter.
Logged

Offline SHOOTALL

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 23836
Re: powder spray
« Reply #34 on: October 06, 2011, 05:18:51 AM »
Don't really know . I shot a 357 max and trimmed some very short to get rid of splits  in the case mouth. Reduce the load then work back up if you try.
Logged
If ya can see it ya can hit it !

Offline DANNY-L

  • GBO Supporter
  • Trade Count: (63)
  • Senior Member
  • *****
  • Posts: 1084
  • Gender: Male
Re: powder spray
« Reply #35 on: October 08, 2011, 04:46:06 AM »
All this was caused by my rest,but learn something new every day. Thanks again for the advise.
Logged
Pages: 1 [2]   Go Up
« previous next »