Author Topic: 22 Hornet and the 1 in 9 twist  (Read 753 times)

0 Members and 1 Guest are viewing this topic.

Offline Default_Required

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 219
22 Hornet and the 1 in 9 twist
« on: October 16, 2011, 08:22:25 PM »
Has any one experimented with heavier bullets in Hornet to see what is capable with the 1 in 9 twist ?
 Figure you could walk towards the 60-62gr with little trouble unless lack of velocity plays a role , its more of a curiousity then anything.

Offline trotterlg

  • GBO Supporter
  • Trade Count: (36)
  • Senior Member
  • *****
  • Posts: 3978
  • Gender: Male
Re: 22 Hornet and the 1 in 9 twist
« Reply #1 on: October 16, 2011, 08:49:01 PM »
Velocity is nothing, how fast it spins is everything, so R.P.S. is what you need to calculate to see if it will be stable.  Larry
A gun is just like a parachute, if you ever really need one, nothing else will do.

Offline topper88

  • Trade Count: (5)
  • Member
  • *
  • Posts: 65
Re: 22 Hornet and the 1 in 9 twist
« Reply #2 on: October 17, 2011, 04:32:11 AM »
I've gone up to 60 grains bullet weight in the Hornet with a maximum load of Lil Gun.  Still grouped a minute or under. I have four other .22 chamberings for my Handi's so I never experimented higher.  With the Hornady A-max in 75 grain in .225 Winchester re-chambering, is the heaviest you can load the 1:9 twist from my experience. I used a 24" bull barrel as the donor barrel.

Offline thejanitor

  • GBO Supporter
  • Trade Count: (59)
  • Senior Member
  • *****
  • Posts: 1094
  • Gender: Male
Re: 22 Hornet and the 1 in 9 twist
« Reply #3 on: October 17, 2011, 06:05:37 AM »
I have loaded up to 65 gr with a light trailboss in an effort to go subsonic and it was stabilized even at slower volocity. Therwise I just shoot 50 and 55gr bullets  for regular higher end shooting. I have some 35 or 37 gr Vmax that I have never tried thinking the twist it too fast . . .  but have not tried to know.  thejanitor

Offline bighunt

  • Doctor of Shootology
  • Trade Count: (1)
  • Member
  • *
  • Posts: 24
  • Gender: Male
  • Shooter, Hunter, Reloader. 100% ate up Gun Nut!
Re: 22 Hornet and the 1 in 9 twist
« Reply #4 on: October 17, 2011, 06:34:13 AM »
I've gone up to 60 grains bullet weight in the Hornet with a maximum load of Lil Gun.  Still grouped a minute or under. I have four other .22 chamberings for my Handi's so I never experimented higher.  With the Hornady A-max in 75 grain in .225 Winchester re-chambering, is the heaviest you can load the 1:9 twist from my experience. I used a 24" bull barrel as the donor barrel.

I have achieved under 1/2 MOA groups with my 24 inch 1 in 9" twist heavy barrel Savage Tactical in .223 with Sierra 80 grain bullets!
Its on the edge of stabilization I know, but I would assume a .225 Winchester would have no problem with 80 and maybe even 90 grain bullets with a 1 in 9" twist.
If it has a barrel and shoots bullets I am interested in it and if I don't have one I want one.  Never met a gun I didn't like.

Offline Default_Required

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 219
Re: 22 Hornet and the 1 in 9 twist
« Reply #5 on: October 17, 2011, 03:51:13 PM »
I've gone up to 60 grains bullet weight in the Hornet with a maximum load of Lil Gun.  Still grouped a minute or under. I have four other .22 chamberings for my Handi's so I never experimented higher.  With the Hornady A-max in 75 grain in .225 Winchester re-chambering, is the heaviest you can load the 1:9 twist from my experience. I used a 24" bull barrel as the donor barrel.
I agree Topper , the old 223 H&R with a HB and 1 in 9 shot a few different 75gr loads very well .. just have not played with the 60+gr .224 projectiles at 22 hornet velocites.  Though these reports are inspiring  ;D

Offline briannmilewis

  • Trade Count: (11)
  • Senior Member
  • *****
  • Posts: 1017
  • Gender: Male
Re: 22 Hornet and the 1 in 9 twist
« Reply #6 on: October 17, 2011, 07:31:43 PM »
Best thing I ever did with my Hornet was buy some "splat" targets, and load up a variety of bullet weights.


My tests showed the only bullets stable at 100 yards were 50gr. I tried 35, 40 and 45 and they all were tumbling ripping non-circular holes in the targets at 100 yards.


In fact, I was so new to centerfire, I thought the non-circular holes were normal bullet and target behavior, till I shot the 50s...perfectly round holes with a really thin "splat" outline.