« previous next »
Pages: [1]   Go Down

Author Topic: What frame do I have?  (Read 480 times)

0 Members and 1 Guest are viewing this topic.

Offline xhare

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 587
What frame do I have?
« on: October 10, 2011, 04:46:18 PM »
I have an NF serial number receiver (1991 manufacture) in 45-70.  In the original paperwork it stated that I could have that barrel fitted with 44, 357, 223, 30-30, 22 hornet, shotguns, but not the high pressure larger calibers (30-06, 22-250, 308, etc).  Since this does not fit into the SB-1 or SB-2 frames available now, what frame do I have?

I have asked the question before, but can't remember the answer. 

Logged

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: What frame do I have?
« Reply #1 on: October 10, 2011, 05:13:27 PM »
Remove the buttstock and look at the back of the receiver.  Solid is cast (SB1), skeletonized is steel (SB2).  I think limiting what barrels the factory will put on older SB2s has to do with liability and the uncertainty regarding the manufacture of the older SB2s.  FWIW, I have a 1988 45-70 on an SB-2 frame and I fitted a 30-06 barrel to it and no problems, but I ain't the factory and no one shot it beside me.  That '06 barrel is now on a post 2000 SB2.
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: What frame do I have?
« Reply #2 on: October 10, 2011, 05:40:27 PM »
As far as factory accessory barrels are concerned, they won't fit any SB2 frames made before 1999 with any rifle barrel. If it's an SB2 frame, you can fit used barrel tho.

Tim

http://www.hr1871.com/Support/accessoryProgram.asp
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline xhare

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 587
Re: What frame do I have?
« Reply #3 on: October 11, 2011, 05:59:54 PM »
So I could not even send it in for a 44 magnum barrel now?  While it was in the 90's I did have a 223 fitted. 
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: What frame do I have?
« Reply #4 on: October 12, 2011, 01:36:42 PM »
Not according to their new requirements.

Tim


Quote
Rifle barrels may be added to firearms manufactured since 1999 and only to frames (SB-2) that originated as a rifle, if frame passes inspection.
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline xhare

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 587
Re: What frame do I have?
« Reply #5 on: October 12, 2011, 05:41:15 PM »
Well, I have two newer frames I can use for such things. 
Logged
Pages: [1]   Go Up
« previous next »