« previous next »
Pages: [1]   Go Down

Author Topic: What would you guys do?  (Read 602 times)

0 Members and 1 Guest are viewing this topic.

Offline flinthead

  • Trade Count: (4)
  • Avid Poster
  • **
  • Posts: 242
What would you guys do?
« on: January 27, 2012, 12:13:46 PM »
Just got my brand new XCR II in and I didn't notice until I got home that there is a tiny flaw near the end of the barrel in the black teflon coating (you can see the stainless steel shining) It's very very small but it does still bother me a little since I just dropped $800 on the gun. Part of me says it's a hunting rifle and not to worry and I really would hate to deal with sending back to Remington... just don't know what to do???? I love the gun by the way! :)
Logged
" A single shot rifle and a one eyed dog"

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26998
  • Gender: Male
Re: What would you guys do?
« Reply #1 on: January 27, 2012, 05:47:24 PM »
Get over it. If that's the only thing wrong with it learn to live with it. If you are even remotely like me you'll put much worse blemishes on it the first time you take it hunting.

The only thing I am concerned with on a hunting rifle is accuracy and the repeatability of that accuracy plus that it functions properly. I know me well enough to know I'm gonna bump and scratch it soon enough so can't see worrying about such a comestic matter.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline saddlebum

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1694
  • Gender: Male
  • "I ain't never been killed in my life."
Re: What would you guys do?
« Reply #2 on: January 28, 2012, 12:03:07 AM »
If it's teflon coated and scratches are going to bother you, you might as well get some coating from Brownell's or some place else to touch up the scratches it will eventually get anyway. Same as touch up cold blueing for carbon steel to keep it from getting rust pits. It might have just had a speck of dust on the barrel when they coated it.
 
Something else to consider is that if there is a badly prepped spot on the barrel that caused the coating to get a bare spot on it, it might continue to come off in that spot and get bigger. Maybe pick at it with your fingernail and if the clear spot gets bigger, send it back. It might have had a little oil spot there that didn't get cleaned off and prepped right. In that case, it could eventually start to "peel" back to the clean metal. You should be able to send it back at any time down the line if it should start to peel.....I think.
Sorry if I gave you more to fret about. Just some thoughts on the matter..................
Logged
" FIREARMS STAND NEXT IN IMPORTANCE TO THE CONSTITUTION ITSELF. THEY ARE THE AMERICAN PEOPLE'S LIBERTY TEETH AND KEYSTONE UNDER INDEPENDENCE."       George Washington

“OUR CONSTITUTION WAS MADE ONLY FOR A MORAL AND RELIGIOUS PEOPLE. IT IS WHOLLY INADEQUATE TO THE GOVERNMENT OF ANY OTHER."           John Adams

Online Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18372
Re: What would you guys do?
« Reply #3 on: January 28, 2012, 12:12:49 AM »
it wouldnt  bother me. Seems like any gun in this house for more then a month has some kind of a mark on it.
Logged
blue lives matter

Offline timothy

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 267
Re: What would you guys do?
« Reply #4 on: January 28, 2012, 01:06:05 AM »
I've covered scatches with a sharpee marker, you might try that.
Logged

Offline flinthead

  • Trade Count: (4)
  • Avid Poster
  • **
  • Posts: 242
Re: What would you guys do?
« Reply #5 on: January 28, 2012, 02:49:27 AM »
Yea you guys are right... Kinda funny,,, I did put a tiny Sharpee dot on the place and I scratched the crap out of it to make sure it would not get any bigger. I can honestly say I know it wont get any bigger, that coating is tuff! Think I'll just go with Graybeard and live with it... these guns are susposed to be tack drivers!!
 
Also wanted to let ya'll know the X-Mark trigger on my gun is sweet... zero creep, crisp, and came out of the box set at three pounds. Maybe Remington has improved these as of late.
Logged
" A single shot rifle and a one eyed dog"

Offline saddlebum

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1694
  • Gender: Male
  • "I ain't never been killed in my life."
Re: What would you guys do?
« Reply #6 on: January 28, 2012, 07:06:14 AM »
Sounds like a keeper to me!   :D
Logged
" FIREARMS STAND NEXT IN IMPORTANCE TO THE CONSTITUTION ITSELF. THEY ARE THE AMERICAN PEOPLE'S LIBERTY TEETH AND KEYSTONE UNDER INDEPENDENCE."       George Washington

“OUR CONSTITUTION WAS MADE ONLY FOR A MORAL AND RELIGIOUS PEOPLE. IT IS WHOLLY INADEQUATE TO THE GOVERNMENT OF ANY OTHER."           John Adams

Offline charles p

  • GBO Supporter
  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2374
  • Gender: Male
Re: What would you guys do?
« Reply #7 on: January 29, 2012, 02:37:01 PM »
All my rifles are hunting rifles.  Some are pretty beat up after 30 years. 
Logged
Pages: [1]   Go Up
« previous next »