Author Topic: 45-70 and Unique  (Read 510 times)

0 Members and 1 Guest are viewing this topic.

Offline DaveW

  • Trade Count: (0)
  • Member
  • *
  • Posts: 22
45-70 and Unique
« on: October 31, 2011, 03:50:22 PM »
Hey all, I have some questions. I have noticed some of the guys talking about loading the 45-70 with unique. Seems like most of them are talking about using cast bullets. I have most of a pound of unique and a bunch of remington 405 grn jsp. Wondering if any of you guys have loaded jacketed bullets up with unique. And are you just loading plinker loads or do any of you load up a good hunting load with unique? I don't need to do it, I have a bunch of 4198 and Varget, (varget is sooooo dirty though!) I just figured, what the hell, I have the stuff, might as well try something new. Thanks for any info.

Offline Flynmoose

  • Trade Count: (1)
  • A Real Regular
  • ****
  • Posts: 786
  • Gender: Male
Re: 45-70 and Unique
« Reply #1 on: October 31, 2011, 04:14:35 PM »
Since I have a pile of SR4759 I had to try some 45-70s. I load Remington 405 JSP to about 1500 fps, a fun one to ring a gong with! I am going to try some Trailboss next, shoulder is getting old and tender.
FM
Dear God please protect our troops, especially the snipers.

Offline Ranch13

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1062
  • Gender: Male
    • Historic Shooting .com
Re: 45-70 and Unique
« Reply #2 on: October 31, 2011, 04:20:37 PM »
There is data out there for unique in the 45-70, and it works well enough, but it leaves an awful lot of airspace in the case.
In the 1920's "sheeple" was a term coined by the National Socialist Party in Germany to describe people that would not vote for Hitler. In the 1930's they held Hitler as the only one that would bring pride back to Germany and bring the budget and economy back.....

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: 45-70 and Unique
« Reply #3 on: November 01, 2011, 11:22:10 AM »
Specifically to your question, Jacketed bullets and Unique isn't really a great idea depending on barrel length.  Most loads you will see it with are for cast, because cast doesn't drag in rifling as much.  It can be done just be careful of a bullet still in the bore due to increased drag.  8)
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.


Offline Swampman

  • GBO Supporter
  • Trade Count: (44)
  • Senior Member
  • *****
  • Posts: 16518
  • Gender: Male
Re: 45-70 and Unique
« Reply #4 on: November 01, 2011, 11:48:39 AM »
My Lyman Manual suggest 11.00-15.00 grains of Unique under a Remington 405 grain Jacketed bullet.  Velocity is given as 890-1223 fps.  Pressures are in the Trapdoor safe category.  Air space is a non-issue.  The upper end load would duplicate Remington factory velocity.
"Brother, you say there is but one way to worship and serve the Great Spirit. If there is but one religion, why do you white people differ so much about it? Why not all agreed, as you can all read the Book?" Sogoyewapha, "Red Jacket" - Senaca

1st Special Operations Wing 1975-1983
919th Special Operations Wing  1983-1985 1993-1994

"Manus haec inimica tyrannis / Ense petit placidam sub libertate quietem" ~Algernon Sidney~