Author Topic: Can I use 12 ga, bbls on my 10 gage frame?  (Read 380 times)

0 Members and 1 Guest are viewing this topic.

Offline TopperT

  • Trade Count: (10)
  • Contributor
  • ***
  • Posts: 303
  • Gender: Male
  • Guard Dog
Can I use 12 ga, bbls on my 10 gage frame?
« on: January 26, 2012, 01:17:20 PM »
I just received a couple of xtra bbl;s, a 28" Full and a 24" mod. bbl on a great purchase of a 12 ga Tracker II (thanks to this site).  I have in my locker,  an older 36"full 10ga, that I no longer use (however post some suggestions here I'm not ruleing that out either ;D )..........anyway, I just tried a swap of 12 bbls, to the 10, SB1 frame, and the bbls. lockup nicely.......now the question......>Should I do this????  Or is this not a safe swap??
Thanks.  Jim

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Can I use 12 ga, bbls on my 10 gage frame?
« Reply #1 on: January 26, 2012, 04:15:28 PM »
Probably have issues with off center pin strikes since the 10 ga. frame uses larger diameter barrels.  If it's not too significant, side to side slop could be shimmed to keep in line.  Dunno, maybe someone else has tried.   :-\
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.


Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Can I use 12 ga, bbls on my 10 gage frame?
« Reply #2 on: January 27, 2012, 05:26:49 AM »
One fella put a standard barrel on an SB2 10ga frame, IIRC he bedded the barrel in the frame in epoxy to make up for the difference in diameter of the chamber swell.

Tim
"Always do right, this will gratify some and astonish the rest" -  Mark Twain