Author Topic: Light primer strikes  (Read 563 times)

0 Members and 1 Guest are viewing this topic.

Offline muslmutt

  • Trade Count: (0)
  • Member
  • *
  • Posts: 83
Light primer strikes
« on: January 31, 2012, 04:43:47 PM »
I was shooting a new to me stainless Contender (pre G2) with a factory 21" 7x30 Waters barrel. Probably 1 in 10 shots did not fire due to light primer strikes. What issue am I probably needing to resolve?
Thanks.
Matt
   

Offline timothy

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 267
Re: Light primer strikes
« Reply #1 on: January 31, 2012, 04:50:36 PM »
Sounds like a weak hammer spring. I'd try some winchester primers, if the problem remains order a new spring. Good luck

Offline Doublebass73

  • GBO Supporter
  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 4579
Re: Light primer strikes
« Reply #2 on: January 31, 2012, 05:06:45 PM »
Sounds like a weak hammer spring. I'd try some winchester primers, if the problem remains order a new spring. Good luck

X2

I had the same issue on my G2, replaced the hammer spring and no more FTF after hundreds of rounds.
"Necessity is the plea for every infringement of human freedom. It is the argument of tyrants; it is the creed of slaves."

---- William Pitt (the Younger), Speech in the House of Commons, November 18, 1783

Offline JustaShooter

  • Trade Count: (23)
  • Senior Member
  • *****
  • Posts: 1025
  • Gender: Male
Re: Light primer strikes
« Reply #3 on: February 01, 2012, 04:03:29 PM »
Also, as I understand it if you have a hammer extension on it, that can cause light primer strikes as well.

Just a Shooter
Christian, Husband, Father
NRA Life Member
NRA Certified Range Safety Officer

Anything I post in these forums is my personal opinion formed by my own interpretation of the topic.
IANAL and anything I say is not intended to be nor should it be taken as legal advice.