« previous next »
Pages: [1]   Go Down

Author Topic: Scope base  (Read 816 times)

0 Members and 1 Guest are viewing this topic.

Offline Fl_Native

  • Trade Count: (0)
  • Member
  • *
  • Posts: 26
Scope base
« on: July 18, 2006, 01:57:30 PM »
I put together a 6.5 TCU carbine for my son with a Leupold scope, base & rings. I have the scope seated as far forward as it will go but it is still too far back to provide comfortable eye relief. Any suggestions for a better mounting system? Does anyone make a picatinny rail for the contender?
Logged

Offline RonF

  • Trade Count: (3)
  • Contributor
  • ***
  • Posts: 418
Re: Scope base
« Reply #1 on: July 19, 2006, 04:19:21 AM »
Nearly all myT/Cs wear Weaver bases and Burris rings.  I've never had a scope eye relief problem.

RonF
Logged

Offline skb2706

  • Trade Count: (5)
  • Senior Member
  • *****
  • Posts: 1428
Re: Scope base
« Reply #2 on: July 19, 2006, 06:06:00 AM »
You may want to have an additional set of base mounting holes drilled and tapped to allow about an inch more forward mounting. Other option would be 'offset' mounts/rings.
This is a factory barrel/stock using the same mount you have and standard medium rings. Albeit a lighter caliber it seems to provide decent eye clearance and still let you position the stock correctly.

Logged

Offline Fl_Native

  • Trade Count: (0)
  • Member
  • *
  • Posts: 26
Re: Scope base
« Reply #3 on: July 19, 2006, 12:04:44 PM »
Thanks for the input.
Logged

Offline Double D

  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 12609
  • SAMCC cannon by Brooks-USA
    • South African Miniature Cannon Club
Re: Scope base
« Reply #4 on: March 23, 2012, 06:10:33 AM »
Well it is 6 years later and picatinny is hot..so is anyone now making a picatinny mount for a contender?
Logged

Offline DLBlack

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
Re: Scope base
« Reply #5 on: March 23, 2012, 12:56:35 PM »
Evolution Gun Works.  WWW.EGW.COM
Logged

Offline Slowpoke Slim

  • Trade Count: (18)
  • A Real Regular
  • ****
  • Posts: 579
  • Gender: Male
Re: Scope base
« Reply #6 on: March 23, 2012, 01:17:38 PM »
Warne makes one, I have one on a carbine barrel.
Logged
Pages: [1]   Go Up
« previous next »