Author Topic: Interarms 30-06 Model Number B66157  (Read 1238 times)

0 Members and 1 Guest are viewing this topic.

Offline honeygun

  • Trade Count: (0)
  • Posts: 2
Interarms 30-06 Model Number B66157
« on: March 25, 2012, 06:55:54 AM »
Recently bought this rifle. However I do not see the Mark X. Did    Alexander Virginia Interarms Manchester England make some of these that were not a Mark X?? Paid $175 and is in very good condition but not sure what year this is.

Offline bremraf

  • Trade Count: (24)
  • Avid Poster
  • **
  • Posts: 193
Re: Interarms 30-06 Model Number B66157
« Reply #1 on: March 25, 2012, 03:15:56 PM »
It should be 80's to early 90's. Great firearm! Enjoy!

Offline mannyrock

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2081
Re: Interarms 30-06 Model Number B66157
« Reply #2 on: March 26, 2012, 04:23:10 AM »
 
Hi,
 
   Interarms, Alexandria, VA, is not a manufacturer of firearms.  They are an importer,who imported huge numbers of surplus and new firearms in the 1960s, 70s, and 80s.   Their headquarters is/was on a busy street corner in downtown Old Town Alexandria, about 5 miles from my childhood home.
 
   The new bolt action rifles they imported were high quality mausers, made in what was then (I believe) Yugoslavia, by (I think) the Zastava factory.  (I could be wrong on this, and invite correction.)  Check all of the markings on your rifle.  The name of the manufacturer or its symbol should be stamped on it.
 
  The top of the line mausers, with the very nicest walnut stocks, were called the Mark X for years and years.  I think that later, in the 1980s or so, they started importing basically the same rifle, with slightly less polishing, and cheaper grade walnut stocks, with various names such as the Viscount or the Cavalier.
 
  The vast majority of all of these commercial mausers were in .30-06 and .270.   Fairly common was the 7 mag.  Almost impossible to find one in .308 Winchester.
 
   Again, though, they were very high quality mausers compared to what you see today.  They generally go for $350 to $450 at gunshows, and are often used as the basis for custom rifles.
 
   I never liked the factory safety, or the trigger.  Most folks replace them with a Timney adjustable trigger with the side safety.
 
  Hope this helps.
 
Mannyrock
 
   

Offline honeygun

  • Trade Count: (0)
  • Posts: 2
Re: Interarms 30-06 Model Number B66157
« Reply #3 on: March 26, 2012, 12:47:52 PM »
Thanks for the info. Appreciate that. Fellow I bought it from says he got it as a gift new in 1975. Would this explain why it does not say Mark X?? No name on it at all. But there are the 3 stamps. On the right side of action on coupling to barrell then just past that on barrell. Would be nice to know what these stamps are and what they mean. I'll see if I can send a picture.

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18267
Re: Interarms 30-06 Model Number B66157
« Reply #4 on: March 27, 2012, 12:51:05 AM »
Dont have an answer for you but ill say this. Ive had two markx  guns one a 25-06 and one a 3006 i bought both figureing on rebarreling for a custom project. thing is both shot so darned well as is i just couldnt bring myself to cut them up. Both were eventually sold to guys that just love them.
blue lives matter