« previous next »
Pages: [1]   Go Down

Author Topic: (range report) 76 model 58 cal huntsman load problems  (Read 1010 times)

0 Members and 1 Guest are viewing this topic.

Offline wileynet

  • Trade Count: (30)
  • Contributor
  • ***
  • Posts: 378
  • Gender: Male
(range report) 76 model 58 cal huntsman load problems
« on: July 29, 2012, 06:33:32 PM »
took my huntsman out using a round ball and patch, started with 70 grains of pyrodex, 2 .5 ft low at 100, worked my way up to 110 still 2 ft low with the sight elevator in uppermost notch any suggestions? different powder projectile combos maybe
Logged
"The beauty of the second amendment is that it will not be needed until they try to take it." -Thomas Jefferson

Huntsman 58,NEF 45/70 manlicher stock, H&R 308, 30-06, 12 ga, 20 ga, H&R 223, H&R 204 varmiter,H&R 243, H&R 44mag, SMLE No 1 MKIV,SMLE No4 MK1, Savage 110 7mm, Ruger BH 45LC, Security Six, SR9, S&W 22a, CVA MTN Rifle, Optima

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: (range report) 76 model 58 cal huntsman load problems
« Reply #1 on: July 30, 2012, 12:31:38 AM »
wiley,
 
Maybe your front sight is too tall?   What is your POI at 25 yards and 50 yards? 
 
I don't know if you sights are attached with screws or brazed or dovetailed.   IF screws or dovetail you can probably buy a shorter front sight from Brownells or H&R or Numrich.  If brazed probably gotta live with what you got.
 
I have had this issue with the blade type front sight on several Handis and I just file down the front sight, very slowly while at the range, an check this "adjustment" by shooting the gun.  When I get the height I want I dress up my "handi-work" by using a black touch up pen.  I also file a small notch on the top/back of the front sight and put a drop of orange paint there for a Profino fire sight. ;D
 
BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline wileynet

  • Trade Count: (30)
  • Contributor
  • ***
  • Posts: 378
  • Gender: Male
Re: (range report) 76 model 58 cal huntsman load problems
« Reply #2 on: July 30, 2012, 06:15:07 AM »
it is brazed on,  would a higher elevator for the rear sight do the same thing?
Logged
"The beauty of the second amendment is that it will not be needed until they try to take it." -Thomas Jefferson

Huntsman 58,NEF 45/70 manlicher stock, H&R 308, 30-06, 12 ga, 20 ga, H&R 223, H&R 204 varmiter,H&R 243, H&R 44mag, SMLE No 1 MKIV,SMLE No4 MK1, Savage 110 7mm, Ruger BH 45LC, Security Six, SR9, S&W 22a, CVA MTN Rifle, Optima

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: (range report) 76 model 58 cal huntsman load problems
« Reply #3 on: July 30, 2012, 07:05:31 AM »
Yes, if you raise the rear sight you raise the POI.
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline Sprint

  • Trade Count: (0)
  • Member
  • *
  • Posts: 61
Re: (range report) 76 model 58 cal huntsman load problems
« Reply #4 on: July 31, 2012, 01:16:18 AM »
Quote from: wileynet on July 30, 2012, 06:15:07 AM
it is brazed on,  would a higher elevator for the rear sight do the same thing?

If the front sight is brazed on, it is not the factory original.  The front sights were dovetailed on the rifle barrels.  However, I have an unused Lyman 16 series that is higher than the original if you are interested. Send me a PM with your address and I will send it to you at no cost.
 
Sprint
 
Logged

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • Moderator
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Re: (range report) 76 model 58 cal huntsman load problems
« Reply #5 on: August 07, 2012, 05:38:03 AM »
Wileynet 1st time I read your post I took it as you moved up to 110 yards. 110gr of powder is a VERY stout load? :o  Kurt
Logged
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: (range report) 76 model 58 cal huntsman load problems
« Reply #6 on: August 07, 2012, 06:38:38 AM »
110gr isn't a particularly stout load in the .58, the Lyman BP Handbook lists BP from 50gr to 190gr under a RB, a mid level load of 110gr runs ~4500-6900LUP (lead units pressure) depending on the barrel length, for comparison Hodgdon lists some 12ga 2¾" shotgun loads in LUP up to 7500LUP, the SAAMI MAP for the 12ga is 11500PSI. Lyman does state specifically they recommend a max load of 100gr 2F for the .58 Huntsman with a 505gr minie, so 110gr under a RB that weighs about half that shouldn't be a problem.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline PHATINJUN

  • "Seeker of the Red Mist"
  • Moderator
  • Trade Count: (144)
  • Senior Member
  • *****
  • Posts: 4076
  • Gender: Male
Re: (range report) 76 model 58 cal huntsman load problems
« Reply #7 on: August 09, 2012, 07:33:57 AM »
I forgot he was using RB .I know mine shootin 500 minnies and 90gr of FF has a pretty good pop. Kurt
Logged
Deceased 2/16/24
https://www.dignitymemorial.com/obituaries/machesney-park-il/kurt-heckman-11671764

Sportster17M2,20"Nickle410Tamer,26"410,
WTUTI12ga,WTU25-06,M158 22RemJet, 24"Ultra.204Ruger24"UltraFluted.204Ruger
M157Mannliker.22Hornet,24".223UltraFluted,   24".223Ultra,7X64BrenekkeUltra,22-250AIUltraFluted            7.62x39,22"303Britstub.32H&Rmag, .32303BritstubHuntsman,24" SS.50calHuntsman 58calHuntsman 12gaHuntsman
NEF RevolversSSModel73.32H&Rmag                     Blued Model73.32H&R mag The herd is shrinking!!
                                 "SOLI DEO GLORIA"
Pages: [1]   Go Up
« previous next »