« previous next »
Pages: [1]   Go Down

Author Topic: Photos of 40MM Scale Whitworth Build  (Read 585 times)

0 Members and 1 Guest are viewing this topic.

Offline michaelfreeland

  • Trade Count: (0)
  • Member
  • *
  • Posts: 24
Photos of 40MM Scale Whitworth Build
« on: September 20, 2012, 11:38:39 AM »
FINALLY !
The barrel was demilled about 18" from the breech end, giving me a lot of stock to work with.
the scale will be .603:1, based on the largest diameter of the barrel we had to work with. I dimensioned a real Whitworth at Gettysburg about two years ago, and refined the prints that are floating around out there.
Any advice?
I especially like the shot of the Bofors Barrel coming out of the spindle of the lathe.....it made people look twice!
Logged

Offline Ex 49'er

  • GBO Supporter
  • Trade Count: (8)
  • Senior Member
  • *****
  • Posts: 1975
  • Gender: Male
Re: Photos of 40MM Scale Whitworth Build
« Reply #1 on: September 20, 2012, 04:35:17 PM »
Nice pictures! Thank you for posting them.
Logged
When you're walking on eggs; don't hop!!

Offline Frank46

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 707
Re: Photos of 40MM Scale Whitworth Build
« Reply #2 on: September 20, 2012, 04:57:10 PM »
Nice pics and thanks for sharing. yeah I would definitely take a second look if I ever saw a 40mm bbl sticking out through the outboard end of a lathe. Frank
Logged

Offline moose53

  • GBO Supporter
  • Trade Count: (0)
  • Contributor
  • *****
  • Posts: 430
Re: Photos of 40MM Scale Whitworth Build
« Reply #3 on: September 20, 2012, 05:20:25 PM »
Looks like you have plenty of thickness left after threading for the breech cap . If you didn't know yet the front swell and threads just clean up if you follow the barrel taper, then you can bondo the bolt divots.   Very nice ! Good length.
Logged
Pages: [1]   Go Up
« previous next »