Author Topic: Shooting round ball in a H & R muzzle loading barrel?  (Read 967 times)

0 Members and 1 Guest are viewing this topic.

Offline Darklin

  • Trade Count: (0)
  • Posts: 2
Shooting round ball in a H & R muzzle loading barrel?
« on: November 29, 2012, 05:06:23 PM »
Hello
I am looking into buying a muzzle loading barrel from H & R. How well do they shoot round ball with their twist rate of 1 in 28? Or do most of you use conicals. Any advice would be most welcome.

Offline OldSchoolRanger

  • Trade Count: (60)
  • Senior Member
  • *****
  • Posts: 2742
Re: Shooting round ball in a H & R muzzle loading barrel?
« Reply #1 on: November 30, 2012, 04:30:50 AM »
I use the TC Cheap Shots (240grain hollow points - all lead bullets) with the Mag Express sabots, I use to use 240grain Hornady XTP bullets with the same sabots, but found the Cheap Shots just as good as the XTP's on deer.  And they're a lot less expensive.

FWIW, they both have the same POI with two  50grain T7 pellets, so no re-sighting needed with either bullet.

I don't think there are many people that use a round ball out of the Huntsman or Sidekicks.
"You are entitled to your own opinions, but you are not entitled to your own facts." - Sen. Daniel Patrick Moynihan

When you allow a lie to go unchallenged, it becomes the truth.

My quandary, I personally, don't think I have enough Handi's but, I know I have more Handi's than I really need or should have.

Offline jdl41389

  • Trade Count: (2)
  • Member
  • *
  • Posts: 59
Re: Shooting round ball in a H & R muzzle loading barrel?
« Reply #2 on: December 02, 2012, 04:30:09 PM »
In my experience prb dont work to well in fast twist rate guns but they do soot very acurately in slow twist rifles like my old 54 cal hawken 1in68 twist

   JDL

Offline lefty41

  • Trade Count: (6)
  • Avid Poster
  • **
  • Posts: 168
  • Gender: Male
Re: Shooting round ball in a H & R muzzle loading barrel?
« Reply #3 on: December 03, 2012, 12:56:01 PM »
My Huntsman 50 caliber shoots round ball (.490) very well with goex 2ff and light loads (50 to 65 grains). However, I have only shot these at 25 yds. May do some testing this week with BH209, but doubt that the starting load (80 grains) for BH209 will handle a round ball very well.
Jerry Miller (lefty41)
"In God we trust"

Offline nanuk-O-dah-Nort

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 701
Re: Shooting round ball in a H & R muzzle loading barrel?
« Reply #4 on: December 29, 2012, 08:54:42 PM »
on another site, there was/is a thread about RB's in fast twist

and they do seem to work well, but need to be a tighter fit than a standard PRB loading, IIRC.


Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
Re: Shooting round ball in a H & R muzzle loading barrel?
« Reply #5 on: January 03, 2013, 05:56:30 AM »
IIRC Hornady makes some hard cast lead round balls for ML's that use thier own special plastic sabot instead of a cloth patch. I have always been impressed at how well a soft lead round ball from a ML works on deer and deer sized game. In my expiernece they work as well as any higher tech pointed or hollowpoint bullet.
I am now wondering how acurately the Hornady hard cast lead round balls with thier special plastic sabot might shoot out of a Huntsman? Anyone shot them?....<><.... :)
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Shooting round ball in a H & R muzzle loading barrel?
« Reply #6 on: January 03, 2013, 06:57:20 AM »
The Poly-Patch(round ball sabot) is no longer made, maybe for a reason.  ??? Lyman specifically forbids their use, hope the Hornady product is better.  ;)

Tim


http://stevespages.com/pdf/lyman_blackpowder.pdf

http://www.hornady.com/store/50-Cal-Plastic-Patch/
"Always do right, this will gratify some and astonish the rest" -  Mark Twain