« previous next »
Pages: [1]   Go Down

Author Topic: 10 Ga. scope base  (Read 549 times)

0 Members and 1 Guest are viewing this topic.

Offline chamois1

  • Trade Count: (20)
  • Member
  • *
  • Posts: 86
10 Ga. scope base
« on: January 17, 2013, 12:56:07 PM »
I just purchased a Pardner 10 Ga Turkey gun. It is D/T for scope base, but the base didn't come with it. Can anyone tell me what base this takes. I have looked thru the FAQ section but have not found the answer.
 
Thanks
Eddie
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 10 Ga. scope base
« Reply #1 on: January 17, 2013, 01:07:13 PM »
Standard H&R base worked fine on my 12ga USH which is basically the same barrel.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline chamois1

  • Trade Count: (20)
  • Member
  • *
  • Posts: 86
Re: 10 Ga. scope base
« Reply #2 on: January 17, 2013, 07:13:22 PM »
Tim
I have 12 Handi's and the base on all are the same. Three hole in base to mount to barrel as You know.
 This new 10 Ga barrel is set up for intermediate eye relief scope. It has four  base mounting screws. Each set ( 2 screws ) is half inch apart, center to center. First set is 7 and  3/4 inches from breech of barrel . second set at 10 & 3/4 inches . 3 inch spread between the two sets of screws.
I will call H&R in the morning.
I'll let you know what I find out.
Eddie
Logged

Offline chamois1

  • Trade Count: (20)
  • Member
  • *
  • Posts: 86
Re: 10 Ga. scope base
« Reply #3 on: January 18, 2013, 10:01:25 AM »
Just to let everyone know. I called H&R this morning and the only scope base they know of that will fit the SB2-MAD Pardner 10 Ga. Turkey Gun is the Weaver #19 which is a two piece. H&R does not have them, or make one for this gun.
Logged
Pages: [1]   Go Up
« previous next »