« previous next »
Pages: [1]   Go Down

Author Topic: G2 Frame and a older barrel with a single screw forend touble  (Read 545 times)

0 Members and 1 Guest are viewing this topic.

Offline inluvwithsara

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 167
  • Gender: Male
G2 Frame and a older barrel with a single screw forend touble
« on: February 14, 2013, 10:03:23 AM »
Ok, super please in a swap I made for my almost nib 45/410 barrel for a octogonal 44mag barrel...put it together and woops...the wood forend gets hung up on the G2 frame :o .  Other than using a dremel tool on the wood till it clears the frame(which would be so wrong as the wood looks pretty nice) what are my options?  The barrel with out the forend fits fine.   HELP!!!! :'(
Logged
Slow is smooth, smooth is fast.

Offline Keith L

  • Moderator
  • Trade Count: (4)
  • Senior Member
  • *****
  • Posts: 3781
Re: G2 Frame and a older barrel with a single screw forend touble
« Reply #1 on: February 14, 2013, 12:04:28 PM »
I had one forend that had some interference that I fixed just as you suggested: I used my dremel and removed about a quarter inch from the length of the wood at the back end of the wings, then used rubbing poly to refinish.
Logged
"Beer is proof that God loves us and wants us to be happy."  Benjamin Franklin

Offline inluvwithsara

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 167
  • Gender: Male
Re: G2 Frame and a older barrel with a single screw forend touble
« Reply #2 on: February 19, 2013, 08:22:48 AM »
Dremel to the rescue...fits fine now...thanks!
Logged
Slow is smooth, smooth is fast.
Pages: [1]   Go Up
« previous next »