« previous next »
Pages: [1]   Go Down

Author Topic: Disposing of empty primed brass and unknown powder  (Read 613 times)

0 Members and 1 Guest are viewing this topic.

Offline huntsman

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 501
Disposing of empty primed brass and unknown powder
« on: February 18, 2004, 02:50:24 AM »
I have some brass that is primed but unfit for use because of damage in the bullet-seating press (shoulder bulges). I also have some unknown powder from some factory rounds that were awfully inaccurate and I pulled the bullets to reload.

What is the proper way to dispose of these potentially hazardous items? I know enough to keep the primed cases and powder separate, but what do I do with them. Obviously they can't just be trhown in the trash.
Logged
There is no more humbling experience for man than to be fully immersed in nature's artistry.

Offline Castaway

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1105
  • Gender: Male
Disposing of empty primed brass and unknown
« Reply #1 on: February 18, 2004, 02:57:44 AM »
I've poured the powder on my garden before in place of fertelizer.
Logged

Offline Questor

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 7075
Disposing of empty primed brass and unknown
« Reply #2 on: February 18, 2004, 03:15:21 AM »
Why can't they be thrown in the trash? They're going into a land fill, aren't they?  Even if they're incinerated, they won't explode forcefully enough to do any damage.
Logged
Safety first

Offline Dave in WV

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2162
Disposing of empty primed brass and unknown
« Reply #3 on: February 18, 2004, 03:42:30 AM »
Dump the powder on the ground or better bury it. I've been told when dynamite gets old and unstable just burying it is safe and soaks up the nitro mix. The brass is probably best dealt with by spraying WD40 in the cases and letting them sit for a few days before dumping them.
Logged
Setting an example is not the main means of influencing others; it is the only means
--Albert Einstein

Offline Zcarp2

  • Trade Count: (11)
  • Avid Poster
  • **
  • Posts: 175
Disposal of powder
« Reply #4 on: February 18, 2004, 05:20:35 AM »
If you don't feel comfortable pouring it on the ground (wonderful source of nitrogen for plants), then make a small pile and light it with a match.  My kids love it when this happens.  MAKE SURE THAT IT IS NOT BLACK POWDER!!!  Black powder will explode or at least singe all the hair off of whatever side is facing the pile at the time of ignition.  Had a less wise acquaintence that did this with one (1) pound of black powder (and lived!).

Don't lean over the pile to light it either.

The empty case with primers can be discharged in you gun.  The disposed of as normal spent primers.  The WD-40 works great too.
Logged
Zcarp2

"The things that will destroy America are prosperity-at-any price, peace-at-any-price, safety-first instead of duty first, the love of soft living and the get-rich-quick theory of life." - - - Theodore Roosevelt

Offline huntsman

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 501
Disposing of empty primed brass and unknown
« Reply #5 on: February 18, 2004, 09:33:23 AM »
Thanks for the advice, guys!

Extra fertilizer is always nice to have, so that's easy enough. By the way, I can't chamber the primed cases, as they are squashed outward at the shoulder. But the WD-40 is possible. Why does this help? I just don't want a primer going off on the garbage folks on the way to the landfill.
Logged
There is no more humbling experience for man than to be fully immersed in nature's artistry.

Offline Dave in WV

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2162
Disposing of empty primed brass and unknown
« Reply #6 on: February 18, 2004, 01:53:37 PM »
The WD40 penetrates the primer compound and breaks it down but it takes a few days.
Logged
Setting an example is not the main means of influencing others; it is the only means
--Albert Einstein
Pages: [1]   Go Up
« previous next »