Author Topic: Load for 215 SWC / 41mag  (Read 474 times)

0 Members and 1 Guest are viewing this topic.

Offline ridgerunner

  • Trade Count: (0)
  • Member
  • *
  • Posts: 28
Load for 215 SWC / 41mag
« on: March 08, 2004, 03:31:38 PM »
I just picked up 500 215gr SWC for my 41 mag.  Now I just need a load for them.  I would like them to go around 1000fps.  I looked through my manuals and didn't come up with anything like that.  Any help would be greatly appreciated.

Thanks

Ridgerunner

Offline Leftoverdj

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1398
Load for 215 SWC / 41mag
« Reply #1 on: March 08, 2004, 03:46:30 PM »
7.5 grains of  Unique will work.

Six grains of any of the real fast powders, Bullseye, 700X, 231, Red Dot, is a safe load that will give the velocity you want and worth trying.
It is the duty of the good citizen to love his country and hate his gubmint.

Offline Larry Gibson

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1069
Re: Load for 215 SWC / 41mag
« Reply #2 on: March 09, 2004, 07:25:46 AM »
ridgerunner

"I just picked up 500 215gr SWC for my 41 mag.  Now I just need a load for them.  I would like them to go around 1000fps.  I looked through my manuals and didn't come up with anything like that.  Any help would be greatly appreciated."

Ditto to Leftoverdj's recommendations.  It just won't get any better than those.

Larry Gibson

Offline BruceP

  • Trade Count: (7)
  • A Real Regular
  • ****
  • Posts: 697
Load for 215 SWC / 41mag
« Reply #3 on: March 10, 2004, 06:23:29 AM »
Well I'll have to agree with Leftoverdj also.
With 7.5 gr. of Unique (the old version) in a Winchester case, Remington 2 1/2 primer and a 215 gr. cast bullet, I get 967 fps out of my 4 5/8" barreled Blackhawk.
BruceP
Lord, Please help me
Keep my small mind open
and my big mouth shut.

Offline dakotashooter2

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 952
Load for 215 SWC / 41mag
« Reply #4 on: March 10, 2004, 10:07:55 AM »
Bevel base, flat base or gas checked???? The data listed above will be fine for flat base & GC but if they are hard and bevel based (as most commercial cast are) you may have to step them up to avoid leading. Even if they are Hard BB try the loads listed above. If they lead bump them up a bit.
Just another worthless opinion!!