« previous next »
Pages: [1]   Go Down

Author Topic: JC Higgins mod 20  (Read 1513 times)

0 Members and 1 Guest are viewing this topic.

Offline LaDano

  • GBO Supporter
  • Trade Count: (13)
  • Contributor
  • *****
  • Posts: 329
  • Gender: Male
JC Higgins mod 20
« on: July 09, 2012, 03:01:40 PM »
I'm swapping receiver/barrel on a mod20 12ga. The carrier latch pins inside the receiver on both sides. The receiver I'm swapping over to is missing these 2 pins and I can't seem to get them out of the old receiver. Any tips on removing them or where can I buy them? 

Thanx
Dano
Logged
Sporter 7X57 Mauser
Sporter 30-06 Mauser
Original M38 6.5X55 Swede
Marlin 30-30
AR-15 .223
AR-15 300aac
Ruger 44 carbine

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: JC Higgins mod 20
« Reply #1 on: July 10, 2012, 05:35:05 AM »
Any idea who made the gun. Pictures might help.. Sorry but I am unsure what what a JCHiggins M20 is..
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26944
  • Gender: Male
Re: JC Higgins mod 20
« Reply #2 on: July 10, 2012, 04:33:32 PM »
High Standard made it. I have my grandfather's 12 gauge that I used when I was a boy learning to shoot shotguns. I've promised it to my youngest grandson who will be five next month.

He thinks EVERYTHING we have is his already and says he ain't sharing it with his dad or anyone else, it's all his he says.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline LaDano

  • GBO Supporter
  • Trade Count: (13)
  • Contributor
  • *****
  • Posts: 329
  • Gender: Male
Re: JC Higgins mod 20
« Reply #3 on: July 10, 2012, 05:21:44 PM »
My youngest son is like that. I get a kick out of it.
Logged
Sporter 7X57 Mauser
Sporter 30-06 Mauser
Original M38 6.5X55 Swede
Marlin 30-30
AR-15 .223
AR-15 300aac
Ruger 44 carbine

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: JC Higgins mod 20
« Reply #4 on: July 11, 2012, 08:39:45 AM »
The xreference says its the HighStandard M200 which I've included a link to parts blow up. I am assuming you are talking about the 'shell stop pins' (no.16). These appear to be just pins. If so there should be a hole directly above, usually about a number 60 drill size, to either insert a punch or for the pins to exit as they are driven upward. Are these solid pins or role pins? I'd bet on solid. These should be available from GunPartsCorp.. Or just make your own.. I prefer spring stock and leave it soft or just at the soft spring draw.  Normally drill rod would be prefered but that somewhat harder to fing in these small sizes. To retain the pin the lower section (1/8 inch or less) is lightly peened oval to create an interference fit.   
http://stevespages.com/ipb-histandard-200.html
 
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline LaDano

  • GBO Supporter
  • Trade Count: (13)
  • Contributor
  • *****
  • Posts: 329
  • Gender: Male
Re: JC Higgins mod 20
« Reply #5 on: July 12, 2012, 03:08:42 AM »
That looks like them, it's the 2 solid pins the carrier assemble pivots on. They must have used a staking tool to peen them in, it's tight in there.

Thanx
Logged
Sporter 7X57 Mauser
Sporter 30-06 Mauser
Original M38 6.5X55 Swede
Marlin 30-30
AR-15 .223
AR-15 300aac
Ruger 44 carbine

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: JC Higgins mod 20
« Reply #6 on: July 12, 2012, 04:18:36 PM »
Be cautious the holes the pins fit in sometimes go thru but at times the hole at the top is smaller. It is meant as an access port for a pin punch..
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline LaDano

  • GBO Supporter
  • Trade Count: (13)
  • Contributor
  • *****
  • Posts: 329
  • Gender: Male
Re: JC Higgins mod 20
« Reply #7 on: July 12, 2012, 06:01:42 PM »
The best I can tell they don't go all the way through. Gonna look closer tomorrow.
Logged
Sporter 7X57 Mauser
Sporter 30-06 Mauser
Original M38 6.5X55 Swede
Marlin 30-30
AR-15 .223
AR-15 300aac
Ruger 44 carbine

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Re: JC Higgins mod 20
« Reply #8 on: July 13, 2012, 04:42:43 AM »
If they don't go through the 'pins' must in reality be screws as used in A5 Brownings..
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26944
  • Gender: Male
Re: JC Higgins mod 20
« Reply #9 on: November 27, 2019, 05:14:36 AM »
Let's bring this one back up and see if folks might want to talk more about it.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!
Pages: [1]   Go Up
« previous next »