« previous next »
Pages: [1]   Go Down

Author Topic: Trap gun ejecting problem  (Read 513 times)

0 Members and 1 Guest are viewing this topic.

Offline 378

  • Trade Count: (12)
  • Avid Poster
  • **
  • Posts: 101
Trap gun ejecting problem
« on: May 12, 2013, 02:31:34 PM »
Can anyone help me with this problem.  I found a nice 12 gauge trap gun for my son. It shoots lights out.  23/25 on his first attempt. 

The problem is that the ejector is sticking every once in a while not ejecting the shell.  The ejector remains stuck in the barrel until you touch the shell with a rod from the other end.  Then it springs as it is supposed to.  The spring seem strong.  We cleaned everything as best we could with gun scrubber and a tooth brush, but it is still occurring.  Any suggestions?

 
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Trap gun ejecting problem
« Reply #1 on: May 12, 2013, 02:56:03 PM »
See the ejector tune info in the FAQs sticky.  ;) Wouldn't hurt to polish the chamber too, info also in the sticky.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline 378

  • Trade Count: (12)
  • Avid Poster
  • **
  • Posts: 101
Re: Trap gun ejecting problem
« Reply #2 on: May 13, 2013, 12:45:12 AM »
Thanks Tim, I will give this a try.  I hope I don't break anything in the process.  This should be a nice father son project.
Logged
Pages: [1]   Go Up
« previous next »