« previous next »
Pages: [1]   Go Down

Author Topic: 44 mag on SB1 shotgun frame?  (Read 753 times)

0 Members and 1 Guest are viewing this topic.

Offline v8r

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 401
  • Gender: Male
44 mag on SB1 shotgun frame?
« on: May 29, 2013, 12:44:53 PM »
Has anyone ever sent a SB1 shotgun frame and had a .44 mag barrel  fit to it. There is supposed to be a difference in firing pin size, will this make a difference? Would it be Ok with factory hot loads?
Logged
V8r's Handi collection.
H&R Ultra Varmint .223
H&R Topper 158 .22 Hornet
H&R Classic Carbine .45 LC
NEF  .357 magnum
H&R "Golden Buffalo" Buffalo Classic 45-70
NEF Pardner !2 Gauge

Offline Spanky

  • Moderators
  • Trade Count: (96)
  • Senior Member
  • *****
  • Posts: 4627
  • Gender: Male
  • USMC Semper Fidelis
Re: 44 mag on SB1 shotgun frame?
« Reply #1 on: May 29, 2013, 01:05:37 PM »
Lots of folks have done it. The factory sends out 357 and 44 mag barrels on SB1 frames now and have for a few years.
 
 
 
Spanky
Logged

Offline v8r

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 401
  • Gender: Male
Re: 44 mag on SB1 shotgun frame?
« Reply #2 on: May 29, 2013, 01:15:08 PM »
I didn't know if there would be a problem if it was a shotgun frame instead of a rifle frame.
Logged
V8r's Handi collection.
H&R Ultra Varmint .223
H&R Topper 158 .22 Hornet
H&R Classic Carbine .45 LC
NEF  .357 magnum
H&R "Golden Buffalo" Buffalo Classic 45-70
NEF Pardner !2 Gauge

Offline YRUpunting?

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 1013
Re: 44 mag on SB1 shotgun frame?
« Reply #3 on: May 29, 2013, 01:17:15 PM »
I have a 44 Mag and 357 Mag that were fitted to a SB1 that started out as a .410.  Haven't had any problems with the large firing pin.  Tried to move the 44 Mag to another SB1 with the large firing pin and the pin sticks in the primer.  Have to cock the hammer and pull the trigger a time or two to get the action open.  The loads were mid-level hand loads.  I'd guess it's more hit than miss having a 44 Mag on a a large firing pin SB1, but it's possible you'll have problems.
Logged

Offline cudatruck

  • Trade Count: (25)
  • A Real Regular
  • ****
  • Posts: 680
  • Gender: Male
Re: 44 mag on SB1 shotgun frame?
« Reply #4 on: May 29, 2013, 07:01:56 PM »
I had problems with my .357 barrel on a 20 ga sb1.  The pressure from factory rounds , not hot handloads, caused primer material to flow back around the firing pin into the bushing hole. one time could not even open the action. Put that barrel on our rifle frame and problem solved.
Logged

Offline hoytcanon

  • If there is a season for it... I have a pot to cook it in.
  • Trade Count: (9)
  • A Real Regular
  • ****
  • Posts: 786
  • Gender: Male
  • Handi's and Henry's... a perfect partnership!
Re: 44 mag on SB1 shotgun frame?
« Reply #5 on: May 30, 2013, 04:38:15 PM »
I shoot K-Hornet and .357 on two Tamer .410 SB1 frames with no problems whatsoever...
Logged
Hoyt Handi's; Ultra Black .22 K-Hornet Shorty, Black Synthetic K-Hornet Shorty & Nickel .410 Combo (sons), Ultra Granite Grey .22 BR Rem, Ultra Nutmeg .223 & .30/30 Shorty Combo (sons), Ultra Forest .223/7mm-08 Shorty Combo, Ultra Forest .243/.308 Combo, Ultra Nutmeg .243/.308 Combo (sons),  Jacaranda/Cocobolo .30/30 & 7.62X39 Shorty Combo, Ultra Black/Stainless .260 Rem Stub, Ultra Black/Stainless .338 Federal Stub,  Ultra Grey .358 Win, Ultra Grey .35 Whelen, Walnut/Cocobolo Mannlicher .357 MAX, Buffalo Classic Mannlicher .44 Mag Shorties w/NDS-38 peeps (X2; Sons & mine), Ultra Grey Stainless .45/70 & .243 & 20 Gauge Combo, Buffalo Classic 26" .45/70, 9.3X74R Mannlicher, Synthetic Nickel .410 & .30/30 & Versa Pak .22 LR Shorty Combo, Ultra Forest/Cocobolo 12 Gauge 3.5" Turkey; Most scoped with DNZ or Dura Sight one-piece bases and Mueller, Hawke or Nikon scopes... several with Skinner Peeps and Williams Fire Sight ramps.

Offline v8r

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 401
  • Gender: Male
Re: 44 mag on SB1 shotgun frame?
« Reply #6 on: May 30, 2013, 04:42:31 PM »
Were these factory fitted barrels guys or home fitted?
Logged
V8r's Handi collection.
H&R Ultra Varmint .223
H&R Topper 158 .22 Hornet
H&R Classic Carbine .45 LC
NEF  .357 magnum
H&R "Golden Buffalo" Buffalo Classic 45-70
NEF Pardner !2 Gauge

Offline v8r

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 401
  • Gender: Male
Re: 44 mag on SB1 shotgun frame?
« Reply #7 on: May 30, 2013, 04:45:18 PM »
The frame I have is a 12 gauge frame . Maybe there is a difference between firing pins in the 12 gauge frame and the 410?

Logged
V8r's Handi collection.
H&R Ultra Varmint .223
H&R Topper 158 .22 Hornet
H&R Classic Carbine .45 LC
NEF  .357 magnum
H&R "Golden Buffalo" Buffalo Classic 45-70
NEF Pardner !2 Gauge

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 44 mag on SB1 shotgun frame?
« Reply #8 on: May 30, 2013, 05:39:29 PM »
Quote from: v8r on May 30, 2013, 04:42:31 PM
Were these factory fitted barrels guys or home fitted?

The only rifle barrels the factory will fit to SB1 shotgun frames are 357 and 44 mag.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: 44 mag on SB1 shotgun frame?
« Reply #9 on: May 30, 2013, 05:46:35 PM »
Quote from: v8r on May 30, 2013, 04:45:18 PM
The frame I have is a 12 gauge frame . Maybe there is a difference between firing pins in the 12 gauge frame and the 410?

Some SB1 frames have smaller rifle size firing pins as do the SB1 357 and 44 mag factory rifles. I had pierced primers with my first Maxi barrel shooting Dan Wesson 357 Maxi factory ammo on an SB1 shotgun frame, but they worked fine when I swapped the barrel to an SB2 frame. Firing pins vary from about .063" to near .100" in diameter, I suspect those on the larger size are those that will cause problems, or to be more precise, the larger hole in the standing breech face is to blame. My 12ga USH barrel cratered primers when shooting the 22 Hornet insert that Larry made me, it had a large pin.

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline cudatruck

  • Trade Count: (25)
  • A Real Regular
  • ****
  • Posts: 680
  • Gender: Male
Re: 44 mag on SB1 shotgun frame?
« Reply #10 on: May 30, 2013, 07:52:37 PM »
The one i posted about was a factory fitted .357 barrel to our shotgun frame we bought new.
Logged

Offline hoytcanon

  • If there is a season for it... I have a pot to cook it in.
  • Trade Count: (9)
  • A Real Regular
  • ****
  • Posts: 786
  • Gender: Male
  • Handi's and Henry's... a perfect partnership!
Re: 44 mag on SB1 shotgun frame?
« Reply #11 on: May 31, 2013, 01:40:26 AM »
My Tamer frames are in swap barrel sets that we put together (not factory fitted - factory fitting is not an option in Canada)... The sets are .22 LR/.22 K-H/.410... And again, no problems at all with these Tamer (nickel) frames.
Logged
Hoyt Handi's; Ultra Black .22 K-Hornet Shorty, Black Synthetic K-Hornet Shorty & Nickel .410 Combo (sons), Ultra Granite Grey .22 BR Rem, Ultra Nutmeg .223 & .30/30 Shorty Combo (sons), Ultra Forest .223/7mm-08 Shorty Combo, Ultra Forest .243/.308 Combo, Ultra Nutmeg .243/.308 Combo (sons),  Jacaranda/Cocobolo .30/30 & 7.62X39 Shorty Combo, Ultra Black/Stainless .260 Rem Stub, Ultra Black/Stainless .338 Federal Stub,  Ultra Grey .358 Win, Ultra Grey .35 Whelen, Walnut/Cocobolo Mannlicher .357 MAX, Buffalo Classic Mannlicher .44 Mag Shorties w/NDS-38 peeps (X2; Sons & mine), Ultra Grey Stainless .45/70 & .243 & 20 Gauge Combo, Buffalo Classic 26" .45/70, 9.3X74R Mannlicher, Synthetic Nickel .410 & .30/30 & Versa Pak .22 LR Shorty Combo, Ultra Forest/Cocobolo 12 Gauge 3.5" Turkey; Most scoped with DNZ or Dura Sight one-piece bases and Mueller, Hawke or Nikon scopes... several with Skinner Peeps and Williams Fire Sight ramps.
Pages: [1]   Go Up
« previous next »