« previous next »
Pages: [1]   Go Down

Author Topic: Any ine make a scout style scope mount?  (Read 979 times)

0 Members and 1 Guest are viewing this topic.

Offline ocxgeno

  • Trade Count: (0)
  • Member
  • *
  • Posts: 20
Any ine make a scout style scope mount?
« on: January 31, 2014, 04:04:11 AM »
Im imagining something that you would take the forend off, place this imaginary mount over the lug and put forearm back on and it tightens said mount between barrel and forearm and the mount would curve around to the top of the barrel and was a weaver style base... anyone? Anyone? Bueller?

Sent from my SM-N900V using Tapatalk

Logged

Offline Badnews Bob

  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 2963
  • Gender: Male
Re: Any ine make a scout style scope mount?
« Reply #1 on: January 31, 2014, 04:13:59 AM »
Not sure what the sever problems have done but if you use the search function you'll find a lot on scout scopes, I have one that uses a extra long weaver rail screwed into all of the rear screws, I then used Magnum Steel,(a JB weld like stuff but in a tow part putty) To make a base, with  a screw thru the front to stabilize it, Works very well.

Logged
Badnews Bob
AE-2 USN retired

Offline revbc

  • GBO Supporter
  • Trade Count: (94)
  • Senior Member
  • *****
  • Posts: 1156
  • Gender: Male
    • NewLife Worship Center
Re: Any ine make a scout style scope mount?
« Reply #2 on: January 31, 2014, 04:58:52 AM »
Stability and tension placed on the barrel might not be best for accuracy.  I think some have used long rails and mounted scope ahead of hammer, others have used the rear iron sight holes to mount something I think.

Some of the experts will be along shortly ;)
Logged
Pastor, NewLife Worship Center
(Retired) Automotive Technology Instructor, West Feliciana High School
Avid Shooter, Hunter, Fisherman and owner of Handi Rifles

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Any ine make a scout style scope mount?
« Reply #3 on: January 31, 2014, 05:26:34 AM »
See the scout mounts in the FAQs sticky, the best place to learn a lot about Handis.  ;)

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline LaOtto222

  • GBO Supporter
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3828
  • Gender: Male
Re: Any ine make a scout style scope mount?
« Reply #4 on: January 31, 2014, 05:30:39 AM »
I used the two rear sight mount holes with a T/C mount. I drilled and tapped both of the holes to a #8-32.

Here is a picture of my 44 Mag with a 1.3X pistol scope mounted on it.




Good Luck and Good Shooting
Logged
Great men have vision and resolve to make dreams come true.

Offline JimP.

  • Trade Count: (12)
  • Avid Poster
  • **
  • Posts: 149
  • Gender: Male
Re: Any ine make a scout style scope mount?
« Reply #5 on: January 31, 2014, 06:06:49 AM »
check out atigunstocks.com they have a stock for H&R/NEF rifles/shotguns that has a front handguard that could have a scope rail mounted on it which would give you the scout scope mount style your looking for, they also have a deluxe heatshield which might allow you to mount a scope rail on it. maybe this helps...JimP.
Logged

Offline Badnews Bob

  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 2963
  • Gender: Male
Re: Any ine make a scout style scope mount?
« Reply #6 on: January 31, 2014, 03:38:06 PM »
Quote from: revbc on January 31, 2014, 04:58:52 AM
Stability and tension placed on the barrel might not be best for accuracy.  I think some have used long rails and mounted scope ahead of hammer, others have used the rear iron sight holes to mount something I think.

Some of the experts will be along shortly ;)

It shoots moa mounted up like that. Works for me anyway.
Logged
Badnews Bob
AE-2 USN retired

Offline ocxgeno

  • Trade Count: (0)
  • Member
  • *
  • Posts: 20
Re: Any ine make a scout style scope mount?
« Reply #7 on: January 31, 2014, 04:50:54 PM »
This will be going on a turkey gun and the 12 gauge is not drilled and tspped for scope.. (I know this isn't the shotgun thread but centerfires use scopes more obviously)

Sent from my SM-N900V using Tapatalk

Logged

Offline 45-70.gov

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 7009
  • Gender: Male
Re: Any ine make a scout style scope mount?
« Reply #8 on: February 01, 2014, 07:07:56 AM »
this took all of 10 minutes
it has a monty carlo stock  so cheek weld is proper



cheap NC Star  with a bushnell trs-25


this is to test/shoot slug handloads
would make a nice turkey set up too
Logged
when drugs are outlawed only out laws will have drugs
DO WHAT EVER IT TAKES TO STOP A DEMOCRAT
OBAMACARE....the biggest tax hike in the  history of mankind
free choice and equality  can't co-exist
AFTER THE LIBYAN COVER-UP... remind any  democrat voters ''they sat and  watched them die''...they  told help to ''stand down''

many statements made here are fiction and are for entertainment purposes only and are in no way to be construed as a description of actual events.
no one is encouraged to do anything dangerous or break any laws.

Offline cwlongshot

  • GBO Supporter
  • Trade Count: (158)
  • Senior Member
  • *****
  • Posts: 9907
  • Gender: Male
  • Shooting, Hunting, the Outdoors & ATVs
Re: Any ine make a scout style scope mount?
« Reply #9 on: February 01, 2014, 10:58:59 AM »
I used the factory rear site threaded holes and a weaver base to mount a red dot in a single ring.  Easy to drill a second hole in a base to align the holes... I just did it again this AM on a Ruger MKIII. Took about ten minutes.  ;D



CW
Logged
"Pay heed to the man who carries a single shot rifle, he likely knows how to use it."

NRA LIFE Member 
Remember... Four boxes keep us free: the soap box, the ballot box, the jury box, and the cartridge box.

Offline Winter Hawk

  • Trade Count: (47)
  • Senior Member
  • *****
  • Posts: 1947
  • Gender: Male
Re: Any ine make a scout style scope mount?
« Reply #10 on: February 02, 2014, 08:28:48 AM »
Like the man said, this is going on a shotgun with no rear sight holes drilled. What .45-70.gov posted looks intriguing!  We need more information on that set up!  Maybe make it with a long Weaver base to mount a pistol scope...

~WH~
Logged
"All you need for happiness is a good gun, a good horse and a good wife." - D. Boone

Offline 45-70.gov

  • GBO Supporter
  • Trade Count: (7)
  • Senior Member
  • *****
  • Posts: 7009
  • Gender: Male
Re: Any ine make a scout style scope mount?
« Reply #11 on: February 02, 2014, 09:37:36 AM »
Logged
when drugs are outlawed only out laws will have drugs
DO WHAT EVER IT TAKES TO STOP A DEMOCRAT
OBAMACARE....the biggest tax hike in the  history of mankind
free choice and equality  can't co-exist
AFTER THE LIBYAN COVER-UP... remind any  democrat voters ''they sat and  watched them die''...they  told help to ''stand down''

many statements made here are fiction and are for entertainment purposes only and are in no way to be construed as a description of actual events.
no one is encouraged to do anything dangerous or break any laws.
Pages: [1]   Go Up
« previous next »