« previous next »
Pages: [1]   Go Down

Author Topic: sheldon lathe chuck.  (Read 824 times)

0 Members and 1 Guest are viewing this topic.

Offline ironglowjr

  • Trade Count: (9)
  • Avid Poster
  • **
  • Posts: 194
  • Gender: Male
sheldon lathe chuck.
« on: June 27, 2013, 04:08:11 PM »
Hey guys i got an old sheldon lathe and it is in great shape but the chuck back plate for a6" cushman chuck is cracked and i am looking for a 1 3/4 x8 tpi. Or a 6"blank.. if you have any thing that can help
Logged

Offline Frank46

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 707
Re: sheldon lathe chuck.
« Reply #1 on: June 27, 2013, 05:13:33 PM »
Check out the home shop machinest website and they most likely can give you a source for the back plate. Hope this helps. Frank
Logged

Offline TNBilly

  • GBO Supporter
  • Trade Count: (4)
  • Avid Poster
  • *****
  • Posts: 111
  • Gender: Male
Re: sheldon lathe chuck.
« Reply #2 on: June 28, 2013, 03:34:31 PM »
Enco and tools4cheap.net are two I came up with.  I couldn't find one with a 1 3/4 thread though, that might be a problem.
Logged
America is great because she is good, and if America ever ceases to be good, America will cease to be great.”        Alexis de Tocqueville

Offline Frank46

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 707
Re: sheldon lathe chuck.
« Reply #3 on: June 28, 2013, 04:42:42 PM »
Also try the practical machinist website as well, forgot about that one. Frank
Logged

Offline gcrank1

  • Trade Count: (24)
  • Senior Member
  • *****
  • Posts: 7644
  • Gender: Male
Re: sheldon lathe chuck.
« Reply #4 on: February 07, 2014, 03:40:37 AM »
Where is the crack? You might be able to weld it and then do the backplate truing (that you need to do on a replacement anyway) and mount it up.
You will have to determine if it is cast or machined steel before welding.
Logged
"Halt while I adjust my accoutrements!"
      ><   ->
We are only temporary caretakers of the past heading toward an uncertain future
22Mag UV / 22LR  Sportster
357Mag Schuetzen Special
45-70  SS Ultra Hunter with UV cin.lam. wood
12ga. 'Ol' Ugly OverKill', Buck barrel c/w  SpeedStock  and swap 28" x Full bird barrel, 1974
Pages: [1]   Go Up
« previous next »