Author Topic: The adventure continues  (Read 801 times)

0 Members and 1 Guest are viewing this topic.

Offline Goatwhiskers

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 277
The adventure continues
« on: February 13, 2014, 09:55:59 AM »
That .444 I bought has turned into quite the project.  In addition to black tape being used to shim the hinge, there appears to have been something done with a 1" spade bit at the screw hole inside the forend, plus a double layer of tape down the barrel channel.  I shimmed the hinge point with a piece of .003" feeler guage, took all the slack out.  Might bed the barrel to the frame, gonna start on the forend wood and make all that fit correctly.  Just as well trim off all the excess stock wood while I'm at it and refinish it.  "Bubba" can sure make a mess of things, my rule is: if you don't know what you're doing, DON'T!  He ought to read this site, I have sure learned a lot about Handis here.  GW

Offline petemi

  • GBO Supporter
  • Trade Count: (73)
  • Senior Member
  • *****
  • Posts: 7386
  • Gender: Male
Re: The adventure continues
« Reply #1 on: February 13, 2014, 10:41:41 AM »
Personally, if the barrel was good, I'd try another frame and junk the forend and stock.  They can't be worth the effort if they've been Bubbafied.  At the moment, I have four spare SB2 frames.  A new barrel invariably locks up fine on one of them.  Pallet wood or black syn stock sets aren't worth a bunch of bucks.

Pete
Keep both eyes open and make the first shot good.
The growing Handi/Sportster/Pardner/Topper Family:  .22 WMR, .22-250. 223, Two Superlight 7mm-08s and one .243, .30-30,  .308, 32-20, 18 inch .356/.358 Win., Two 16.5 inch .357 Max., 18 inch 38-55 BC Carbine, 16.5 inch .445 Super Mag., .45LC, 16.5 and 22 inch .45-70s, .50 Huntsman SS, .410, 20 ga., 12 ga., 20 ga. Pardner Pump, Versa-Pack .410 - .22
[size=7.4 pt]PLEASE DONATE TO THE GBO SERVER FUND  We're closer to the goal but not there yet, we can still use more donations, thanks

http://www.gboreloaded.com/forums/index.php/topic,191112.msg1098959491.html#msg1098959491

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: The adventure continues
« Reply #2 on: February 13, 2014, 11:07:42 AM »
That .444 I bought has turned into quite the project.  In addition to black tape being used to shim the hinge, there appears to have been something done with a 1" spade bit at the screw hole inside the forend, plus a double layer of tape down the barrel channel.  I shimmed the hinge point with a piece of .003" feeler guage, took all the slack out.  Might bed the barrel to the frame, gonna start on the forend wood and make all that fit correctly.  Just as well trim off all the excess stock wood while I'm at it and refinish it.  "Bubba" can sure make a mess of things, my rule is: if you don't know what you're doing, DON'T!  He ought to read this site, I have sure learned a lot about Handis here.  GW

GW,

Sounds to me like your 444M was accurized in the Profino Custom Shop! ::)   Sorry to hear you bought someone else's mess and I hope you are able to salvage your investment.

BB

RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline jeepmann1948

  • GBO Supporter
  • Trade Count: (67)
  • Senior Member
  • *****
  • Posts: 1422
  • Gender: Male
  • San Angelo, Texas
Re: The adventure continues
« Reply #3 on: February 13, 2014, 02:32:29 PM »
Actually the forearm can be repaired very nicely by using a pillar and proper bedding of the barrel channel .My 26" 25-06 has been shimmed and it is one of my most accurate Handi's.
[/size]Black tape has a lot of uses but I cannot think of any on a firearm ::)
[/size]Perhaps Pete  can enlighten us on the proper use of black tape as he is a retired wire twister ;D
George
"it ain't what you shoot em with......................
  it's where you hit em "

Offline bigchiefj

  • Trade Count: (0)
  • Member
  • *
  • Posts: 67
  • Gender: Male
Re: The adventure continues
« Reply #4 on: February 15, 2014, 01:51:39 PM »
My Dad retired from the black magic electrical work. You can do a lot of good stuff with vinyl electrical tape if it's the good USA made stuff!

Offline theratdog

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 405
Re: The adventure continues
« Reply #5 on: February 15, 2014, 06:02:34 PM »
i have fixed a lot screwed up gun there are a lot extra parts to be had for the handy rifle good luck have fun i have. ;) ;) ;)

Offline Goatwhiskers

  • Trade Count: (2)
  • Contributor
  • ***
  • Posts: 277
Re: The adventure continues
« Reply #6 on: February 15, 2014, 09:44:35 PM »
In the 'smithing business out in the rural you get to deal with a lot of black tape on guns, I've even had them reinforced with radiator clamps.  This guy even tied down the loose ends of the sling with tape.  If all the pieces are there I can fix it, sometimes when they're not.  I really think this one sneaked out of the factory with that tiny bit of sideways slack in the hinge and Bubba was gonna "fix" it.  The forend won't be any problem, all of the wood looks good on the outside, metal finish looks good as new.  Bore is perfect, tho it had a trace of lead in it.  Before I play with external wood fit I'll work up some loads, take a few pics, and report back.  Onward!  GW