« previous next »
Pages: [1]   Go Down

Author Topic: Black Turkey 12 gauge turkey choke needed, any suggestions or spares?  (Read 1760 times)

0 Members and 1 Guest are viewing this topic.

Offline stewmagoo

  • Trade Count: (17)
  • Contributor
  • ***
  • Posts: 342
  • Gender: Male
Black Turkey 12 gauge turkey choke needed, any suggestions or spares?
« on: February 18, 2014, 10:25:38 AM »
As most of you guys know I rescued a discontinued 3.5 Black Turkey 12 gauge from the pawn shop.  It has the 24'' threaded choke barrel, but only came with a knurled end screw in modified.  Any suggestions for a choke for this one?  Anyone have a spare they want to part with? 

Will a full choke be enough or do I need an extra full choke?  What about an aftermarket like an Undertaker or Jellyhead? 
Thanks again!
Stew
Logged

Offline Doublebass73

  • GBO Supporter
  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 4579
Re: Black Turkey 12 gauge turkey choke needed, any suggestions or spares?
« Reply #1 on: February 18, 2014, 10:51:40 AM »
Full will be plenty but you could always go aftermarket if they're easier to find. I'd grab whatever you can find locally and start patterning some loads.
Logged
"Necessity is the plea for every infringement of human freedom. It is the argument of tyrants; it is the creed of slaves."

---- William Pitt (the Younger), Speech in the House of Commons, November 18, 1783

Offline bikerbeans

  • Trade Count: (168)
  • Senior Member
  • *****
  • Posts: 4070
  • Gender: Male
  • BANDIT - North American Snake Hound
Re: Black Turkey 12 gauge turkey choke needed, any suggestions or spares?
« Reply #2 on: February 18, 2014, 11:11:54 AM »
stew,

I think the extended XXXXXXFull turkey chokes have only one purpose and that is to take your money and put it in the pocket of the tube manufacturer.   The cost difference between a standard choke and one with a "Cool" name is quite a bit.  I would just get a regular full choke tube and like DB says, pattern your gun.  Look in the FAQs sticky and it will tell you which chokes will fit the H&R barrel.   FWIW, I would check and make sure the steel weight is in the stock channel of your shotgun.  If it isn't I would put lead shot in the stock bolt channel because a factory 3.5" 2 1/4oz turkey load in a light weight H&R shotgun can be a handful. A slip on limbsaver recoil pad would help as well.

BB
Logged
RIP Tom: Tom Nolan, ( bikerbeans) passed away this afternoon (02-04-2021).

Why be difficult, when with a little extra effort you can be impossible?

Wife's Handis;  300 BLKOUT

MINE:  270W, 308x444, 44 Bodeen, 410 shorty rifled slug gun, 445 SuperMag Shikari, 45 ACP shorty,  45-70 Shikari, 45 Cal Smokeless MZ, 50cal 24" SS Sidekick, 50 cal 24" Huntsman, 50 cal 26" Huntsman, 50 cal 26" Sidekick, 50-70 Govt Shikari, Tracker II 20 ga shorty, 20 ga VR Pardner, 20ga USH, 12ga VR NWTF, 12ga Tracker II shorty WITHOUT scope, 12ga USH, 10 ga  Pardner Smoothbore slug gun & 24ga Profino Custom rifled slug gun.

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Black Turkey 12 gauge turkey choke needed, any suggestions or spares?
« Reply #3 on: February 18, 2014, 12:33:48 PM »
The recoil pad on this model is actually very good.  I never had any issue with the 3.5s and the first thing I did was take out the weight.  I was actually impressed how well it eats up the recoil.  The factory extra full did great with buckshot.  I also got flush Mossberg 500 modified choke for mine for rabbits etc.  8)
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline stewmagoo

  • Trade Count: (17)
  • Contributor
  • ***
  • Posts: 342
  • Gender: Male
Re: Black Turkey 12 gauge turkey choke needed, any suggestions or spares?
« Reply #4 on: February 18, 2014, 08:22:57 PM »
Well I really doubt I will shoot any 3.5 in it. Mine does have the factory lead weight in it. I do have a LImbsaver slip on as a back up. May remove the factory pad and place a butt plate and then the slip on over that. I would love to find a factory choke for this shotgun. I have found some factory full flush chokes on the auction sites. I would like the extended xfull version.


Sent from my iPhone using Tapatalk
Logged

Offline Doublebass73

  • GBO Supporter
  • Trade Count: (46)
  • Senior Member
  • *****
  • Posts: 4579
Re: Black Turkey 12 gauge turkey choke needed, any suggestions or spares?
« Reply #5 on: February 18, 2014, 10:44:29 PM »
You might check with H&R an see if the have any factory X-full chokes in stock. That's what I used to use, my 3.5" came from the factory with it. If they don't I used to buy Mossberg chokes right at Walmart, find a flush fit full and you'll have plenty of choke.
Logged
"Necessity is the plea for every infringement of human freedom. It is the argument of tyrants; it is the creed of slaves."

---- William Pitt (the Younger), Speech in the House of Commons, November 18, 1783

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Black Turkey 12 gauge turkey choke needed, any suggestions or spares?
« Reply #6 on: February 19, 2014, 11:17:17 AM »
I think I already gave you this in a PM conversation, but there are several extended chokes, but they aren't cheap at TruLock.  8)


http://www.trulockchokes.com/get-chokes.php?manufacturers_id=34&guage=12&seechokes=See+Chokes
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline stewmagoo

  • Trade Count: (17)
  • Contributor
  • ***
  • Posts: 342
  • Gender: Male
Re: Black Turkey 12 gauge turkey choke needed, any suggestions or spares?
« Reply #7 on: February 20, 2014, 03:17:50 AM »
Quote from: tacklebury on February 19, 2014, 11:17:17 AM
I think I already gave you this in a PM conversation, but there are several extended chokes, but they aren't cheap at TruLock.  8)


http://www.trulockchokes.com/get-chokes.php?manufacturers_id=34&guage=12&seechokes=See+Chokes

TB,
Yes you did provide me this information.  My rich uncle hasn't got out of the poor house yet.  This is why I posted this for other thoughts. LOL.

Stew
Logged

Offline tacklebury

  • GBO Supporter
  • Trade Count: (12)
  • Senior Member
  • *****
  • Posts: 3633
  • Gender: Male
  • Central Michigan
Re: Black Turkey 12 gauge turkey choke needed, any suggestions or spares?
« Reply #8 on: February 20, 2014, 01:04:54 PM »
Ok, they are pricey.  Sorry, I've had about 5 choke conversations lately.  lol  ;)
Logged
Tacklebury --}>>>>>    Multi-Barrel: .223 Superlite, 7mm-08 22", .30-40 Krag M158, .357 Maximum 16-1/4 HB, .45 Colt, .45-70 22" irons, 32" .45-70 Peeps, 12 Ga. 3-1/2 w/ Chokes, .410 Smooth slugger, .45 Cal Muzzy, .50 Cal Muzzy, .58 Cal Muzzy

also classics: M903 9-shot Target .22 Revolver, 1926 .410 Single, 1915 38 S&W Break top Revolver and 7-shot H&R Trapper .22 6" bbl.

Offline spikehorn

  • GBO Supporter
  • Trade Count: (84)
  • Senior Member
  • *****
  • Posts: 3000
  • Gender: Male
Re: Black Turkey 12 gauge turkey choke needed, any suggestions or spares?
« Reply #9 on: February 21, 2014, 07:46:58 AM »
Mossberg 500 chokes work in H&R's. I have one these shotguns and for turkey I use a Tru Glo Ported turkey choke and shoot Federal 3" #5 turkey loads. #' actually pattern better than 3 1/2" in my gun
Logged
308 win                 45-70                       12ga         
30-30                    223 stainless steel   20ga TDC
44 mag                  Tracker II 20ga        20ga
45-70 Manlicher     20ga USH                28ga
                                                              410ga

Offline stewmagoo

  • Trade Count: (17)
  • Contributor
  • ***
  • Posts: 342
  • Gender: Male
Re: Black Turkey 12 gauge turkey choke needed, any suggestions or spares?
« Reply #10 on: February 21, 2014, 10:40:27 AM »

Quote from: spikehorn on February 21, 2014, 07:46:58 AM
Mossberg 500 chokes work in H&R's. I have one these shotguns and for turkey I use a Tru Glo Ported turkey choke and shoot Federal 3" #5 turkey loads. #' actually pattern better than 3 1/2" in my gun

Spikehorn,
Glad you brought that up. I saw the same choke at Dunhams for like 24 bucks. It looks really nice. Extended and ported. Thanks for the input. I may try it.

Stew


Sent from my iPhone using Tapatalk
Logged

Offline papadave

  • Trade Count: (44)
  • Contributor
  • ***
  • Posts: 271
Re: Black Turkey 12 gauge turkey choke needed, any suggestions or spares?
« Reply #11 on: February 21, 2014, 11:15:30 AM »
I also used the Truglo ported with #5 Win 3" when I had my 1300 Win. Really nice pattern.
Logged
Pages: [1]   Go Up
« previous next »