« previous next »
Pages: [1]   Go Down

Author Topic: Big Bore Pistol Caliber Handi Rifles  (Read 1279 times)

0 Members and 1 Guest are viewing this topic.

Offline bb4guns

  • Trade Count: (0)
  • Member
  • *
  • Posts: 15
  • Gender: Male
Big Bore Pistol Caliber Handi Rifles
« on: August 10, 2020, 09:07:13 AM »
Anybody out there have a 480 Ruger or a 475 Linebaugh Handi?
Logged

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26942
  • Gender: Male
Re: Big Bore Pistol Caliber Handi Rifles
« Reply #1 on: August 10, 2020, 09:24:55 AM »
The .480 "might" be do able safely, but I don't think the .475 would be. Pressures are just too high for a case head that big I'm pretty sure.
Logged


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
Re: Big Bore Pistol Caliber Handi Rifles
« Reply #2 on: August 10, 2020, 10:23:29 AM »
Either would be doable, both run less pressure than the 500S&W which was factory available and has a bigger case head at .526" vs .505". I don't recollect anyone ever doing either, but both have been discussed. There have been lots of 454 Casull and a few 460 S&W done which don't require a rebore, just a simple hand rechamber.

Tim

Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline bb4guns

  • Trade Count: (0)
  • Member
  • *
  • Posts: 15
  • Gender: Male
Re: Big Bore Pistol Caliber Handi Rifles
« Reply #3 on: August 10, 2020, 11:38:11 AM »
I was thinking of a Barrel Stub. Hoping that a 45-70 extractor would work to remove the brass case. I think it would also be a good candidate for subsonic loads.
Logged

Offline geezerbiker

  • Trade Count: (14)
  • Senior Member
  • *****
  • Posts: 1884
  • Gender: Male
Re: Big Bore Pistol Caliber Handi Rifles
« Reply #4 on: August 15, 2020, 08:30:20 PM »
Just get one in .45-70.  You won't be disappointed.

Tony
Logged

Offline bb4guns

  • Trade Count: (0)
  • Member
  • *
  • Posts: 15
  • Gender: Male
Re: Big Bore Pistol Caliber Handi Rifles
« Reply #5 on: September 22, 2020, 11:24:00 AM »
Beans thanks for the 45-70 recommendation. I just picked one up off of FleBay. My plan is to shoot 400 grain cast bullets @ 1400fps.
Logged

Offline bb4guns

  • Trade Count: (0)
  • Member
  • *
  • Posts: 15
  • Gender: Male
Re: Big Bore Pistol Caliber Handi Rifles
« Reply #6 on: September 22, 2020, 11:25:45 AM »
I hate auto spell check thanks Geezerbiker...
Logged

Offline geezerbiker

  • Trade Count: (14)
  • Senior Member
  • *****
  • Posts: 1884
  • Gender: Male
Re: Big Bore Pistol Caliber Handi Rifles
« Reply #7 on: September 26, 2020, 08:52:31 PM »
I find my .45-70 Handi shoot everything I put though it very well.  When I first got it, I didn't have any .458 bullets so I Teflon tape patched up some 430g .451 bullets I had cast for my M1911.  I only shot them at 50 yards but the accuracy was spot on. From round balls all the way up to 405g cast slugs, they all shoot great.  I've never been so pleased with a rifle.  I have a few other Handi rifles I'm fond of but this one is my favorite.

Tony
Logged

Offline bb4guns

  • Trade Count: (0)
  • Member
  • *
  • Posts: 15
  • Gender: Male
Re: Big Bore Pistol Caliber Handi Rifles
« Reply #8 on: September 28, 2020, 01:33:06 AM »
GB,
My 45-70 barrel is shooting plain base 400 grain cast bullets very well at 1250fps. Accuracy is around 1 inch @ 50yard groups from the bench utilizing a Red Dot sight. Going to have the barrel cut back to 16.5 inches as I only plan to shoot cast “Government” velocity loads. Your idea was way cheaper than a custom barrel stub to hit targets with a big thump!
Bret
Logged

Offline geezerbiker

  • Trade Count: (14)
  • Senior Member
  • *****
  • Posts: 1884
  • Gender: Male
Re: Big Bore Pistol Caliber Handi Rifles
« Reply #9 on: October 04, 2020, 11:34:48 PM »
I put a target knob peep sight on mine and my grandson as one with a scope.  If I recall correctly I was doing about 1/2" groups at 50 yards the first time I shot it and I was plinking more than trying for good groups.  I don't think I've ever shot it off a bench.

At one time I lost it in a bet with my grandson and had to get another one to trade to him to get this one back.  Lucky for me he likes a scope better than a peep sight.

Tony
Logged

Offline jedman

  • GBO Supporter
  • Trade Count: (24)
  • A Real Regular
  • *****
  • Posts: 921
  • Gender: Male
  • Retired and livin the dream !
Re: Big Bore Pistol Caliber Handi Rifles
« Reply #10 on: May 04, 2021, 03:20:09 PM »
About 10 years ago, Green Mountain Barrels use to list a lot of limited quantities of barrel blanks at great prices. I have bought many of them and made them into handi barrels mostly. For several months they had some stainless steel blanks in 475 cal. and I really wanted to make up a couple barrel liners in 480 Ruger but waited to long to order them and they disappeared.
The same with tapered octagon barrels, when they have them they are sold out very quickly and when they are gone they don’t seem to get them again.
I think a handi in 480 Ruger would be a great caliber !

jedman
Logged
Current handi family, 24 ga./ 58 cal ,50-70,  45 smokeless MZ, 44 belted bodeen, 44 mag,.375 H&R (wildcat),375 Win.,357 max, .340 MF ( wildcat ), 8 mm Lebel, 8x57, .303 British, 270 x 57 R,(wildcat) 256 Win Mag, 2 x 243 Win,2 x 223 Rem. 7-30 Waters &20ga.,
Pages: [1]   Go Up
« previous next »