« previous next »
Pages: [1]   Go Down

Author Topic: Best loads for 1895 45-70 ?  (Read 1487 times)

0 Members and 1 Guest are viewing this topic.

Offline olter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 25
Best loads for 1895 45-70 ?
« on: June 21, 2004, 04:53:54 AM »
Fascinated by this rifle. Friend of mine has one and interested in reloading. And black powder cast bullit loads ? Any help you guys can provide wiuld be appreciated .
Logged

Offline oso45-70

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1918
  • Gender: Male
marlin lecer action centerfire rifles
« Reply #1 on: June 21, 2004, 12:05:27 PM »
Olter,
You might do better down at the Black powder forum, I think there are more black powder fellers there. Hope you find what you are looking for.
Good luck......Joe...........
Logged
LIFE NRA BENEFACTOR
LEAA LIFE MEMBER
GOA MEMBER
CCKBA MEMBER
AF & AM
NAHC LIFE
NMSSA MEMBER
ATA MEMBER

Profanity is the crutch of a crippled brain

Offline crow_feather

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1359
Best loads for 1895 45-70 ?
« Reply #2 on: June 21, 2004, 12:08:03 PM »
olter,

I load my 95G with 50.0 gr of IMR 4198 under a 300 grain bullet.  It moves out just over 2100 fps.  With this load, my rifle will keep 5 holes touching at 100 yds.  The bad part is that because the rifle recoils straight back, I keep beating the heck outta my nose with the scope.

C F
Logged
IF THE WORLD DISARMED, WE WOULD BE SPEAKING THE LANGUAGE USED BY THE AGGRESSIVE ALIENS THAT LIVE ON THE THIRD MOON OF JUPITOR.

Offline olter

  • Trade Count: (0)
  • Member
  • *
  • Posts: 25
45-70 LOADS
« Reply #3 on: June 21, 2004, 12:47:39 PM »
Thanks for the info . Going to have some fun with this rascal.
Logged

Offline oso45-70

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1918
  • Gender: Male
marlin lever action centerfire rifles
« Reply #4 on: June 23, 2004, 08:21:09 PM »
Olter, I guess i missed the boat on that one, I thought you wanted black powdwe loads, When you said black powder cast bullets i miss understood you, Looks like you got the info. you needed, Good luck.........Joe.............
Logged
LIFE NRA BENEFACTOR
LEAA LIFE MEMBER
GOA MEMBER
CCKBA MEMBER
AF & AM
NAHC LIFE
NMSSA MEMBER
ATA MEMBER

Profanity is the crutch of a crippled brain

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
Best loads for 1895 45-70 ?
« Reply #5 on: June 30, 2004, 06:15:25 AM »
Quote from: crow-feather
olter,

I load my 95G with 50.0 gr of IMR 4198 under a 300 grain bullet.  It moves out just over 2100 fps.  With this load, my rifle will keep 5 holes touching at 100 yds.  The bad part is that because the rifle recoils straight back, I keep beating the heck outta my nose with the scope.

C F


Crow-feather:

OUCH...been there---Done that.....

Try one of the Leupold Vari-X-1 scopes...that's what I use on my 1895GS and I don't have any problem with it...They have a much longer eye-relief than most and still give you a crystal clear site picture...and they don't cost too much either.


Mac
Logged
You can cry me a river... but...build me a bridge and then get over it...

Offline JCP

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 178
Best loads for 1895 45-70 ?
« Reply #6 on: July 04, 2004, 04:32:18 PM »
Better stay away form the black powder with a lever gun unless you love to take it apart to clean it up after every fireing session.
Logged

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Best loads for 1895 45-70 ?
« Reply #7 on: July 05, 2004, 05:34:13 PM »
Quote from: JCP
Better stay away form the black powder with a lever gun unless you love to take it apart to clean it up after every fireing session.


You got that right. I only shoot Black powder cartridges in my Rolling Block and my Shiloh Sharps 45-70's. I use the smokeless with my 1895. :)
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline crow_feather

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1359
Best loads for 1895 45-70 ?
« Reply #8 on: July 06, 2004, 05:19:57 PM »
Mac11700,

I've been trying to get an older weaver low power but keep getting beat at the end of the auctions.  I think I might have one comming up though.  
Thank you for the info,

C F
Logged
IF THE WORLD DISARMED, WE WOULD BE SPEAKING THE LANGUAGE USED BY THE AGGRESSIVE ALIENS THAT LIVE ON THE THIRD MOON OF JUPITOR.

Offline Old Griz

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2030
  • Gender: Male
Best loads for 1895 45-70 ?
« Reply #9 on: July 08, 2004, 07:32:27 PM »
:cb2: Hey crow-feather, try the Simmons 4x shotgun scope. 5" of eye relief and a very clear, bright picture. Maybe I just got lucky, but it has a brighter picture than either my Burris or Leupold. Surprised the heck out of me, especially since it only cost $89.  :eek:
Logged
Griz
<*}}}><

I Cor. 2.2 "For I determined not to know anything among you, save Jesus Christ, and him crucified."

Offline marlinman93

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 849
Best loads for 1895 45-70 ?
« Reply #10 on: July 24, 2004, 08:15:23 AM »
Olter,
 If you want black powder loads, without all the hassle of cleanup, use some CleanShot powder. It has the characteristics of BP, without the mess or corrosion.
 I use it in many of my old Marlins, and single shot rifles, with excellent results. One note though; the cases need to be washed in soapy water at the end of the shooting day. It will still corrode the brass, even though it wont hurt steel.
Logged
Ballard, the great American Rifles!
Pages: [1]   Go Up
« previous next »