« previous next »
Pages: [1]   Go Down

Author Topic: Possible .45 patched paper mould  (Read 546 times)

0 Members and 1 Guest are viewing this topic.

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Possible .45 patched paper mould
« on: April 25, 2004, 03:33:46 PM »
I am posting this for Ed Barrett.  It was originially on www.accuratereloading.com under the Cast Bullets forum.

"I am checking to see if there is enough interest in a group buy of a 500 grain paper patched bullet mold from Lee. I have seen what paper patched bullets can do as far as accuracy and speed without leading and I am very happy with the results. I can even get them to feed perfectly in my gibbs 45-70. I did this with some loaned bullets from a friend and I am going to get a mold for myself. I thought if enough other casters would like to go in on a group buy we could get it done a lot cheaper and we could compare notes working up loads. Let me know what you think.
Ed Barrett    AKA elbStJoeMO "

Let us know if there is interest - it's something I'd like to try.
Logged
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline 50 Calshtr

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 134
Possible .45 patched paper mould
« Reply #1 on: April 26, 2004, 08:13:47 AM »
I'd go for one. :) Thanks for doing the leg work.
Logged

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Possible .45 patched paper mould
« Reply #2 on: April 27, 2004, 01:15:15 AM »
Since I discovered (Doh!) the paper patch discussion board RIGHT HERE ON GRAYBEARDOUTDOORS.COM, I'll move further discussion to that forum.

Thanks Graybeard (and thanks Wener).  This is a broad based project over several (very good let me add) boards and forums.  We appreciate the support of all.
Logged
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
Possible .45 patched paper mould
« Reply #3 on: May 02, 2004, 01:37:50 AM »
50 Calshtr -
check Ed's post on the Paper Patch forum.
Thanks,
Tim K
Logged
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline frank405

  • Trade Count: (0)
  • Member
  • *
  • Posts: 70
molds
« Reply #4 on: May 03, 2004, 04:42:03 AM »
Why don't you go to www.mountainmolds.com and order an iron mold that will last. I doubt very much that there is much difference in price between Dan's molds and a special run from Lee.
Logged

Offline 50 Calshtr

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 134
Possible .45 patched paper mould
« Reply #5 on: May 03, 2004, 06:24:10 AM »
Tim K,
   Got it, thanks.
Logged

Offline The Cast Bullet Kid

  • Trade Count: (0)
  • Member
  • *
  • Posts: 82
  • Gender: Male
Possible .45 patched paper mould
« Reply #6 on: May 03, 2004, 03:09:17 PM »
Also worth contacting is Jim Allison in Australia.
This guy is a whizz with moulds and has 750 designs!
http://www.castbulletengineering.bigpondhosting.com/default.htm
Logged
Cheers

Jeff
Pages: [1]   Go Up
« previous next »