Author Topic: Newbie reloading question (Read 426 times)

Loki_762 · « **on:** May 09, 2004, 08:51:39 AM »

For my birthday, I am getting the Lee Anniversary Reloading Kit, as well as a set of dies in .223. I am planning on loading some 50 grain V-max molys or maybe some 50 grain Nosler BTs. I picked this weight because my Savage prefers the slightly longer bullets, and I want to get as much speed as possible. I will be using these bullets to take coyotes and rockchucks. So, my question is this: Does anyone have any pet loads with these bullets that shoot well for them? While accuracy takes precedence over speed, I would like them to be fairly quick. Is there a particular powder/primer combo that you would recommend? I am SO excited to start reloading, and I am willing to listen to any suggestions!
Thanks,
Loki

The Shrink · « **Reply #1 on:** May 09, 2004, 11:51:47 AM »

Loki

Don't be so excited that you don't check any suggested load with one or more manuals. Always stay within the recommended limits set by the manuals reguardless what somebody's "pet" load is. I don't shoot the 223, so I can't steer you wrong. If you haven't, invest in at least two handloading manuals and stay within their recommended loads.

Secondly, always back off a suggested load about 10% and work up to that load in your rifle. Your chamber might be slightly tighter, your throat shorter or longer, or your barrel slightly larger or tighter than the gun the other guy is shooting, and what is safe in his may be excessive in yours.

Stay cautious and you will become an old reloader who retains all his fingers and his guns remain intact.

Wayne the Shrink

bigjeepman · « **Reply #2 on:** May 09, 2004, 01:58:56 PM »

Loki ...

I totally agree with the Shrink. I read two manuals all the way through twice each before I loaded my first round. If you are interested in Nosler bullets like I always have been, then I suggest you buy the Nosler Reloading Guide 5th Edition along with at least one other manual. The Nosler manual has dozens of loads for you to try in the 40gr, 50gr, and 55gr ballistic tips. I think it should be around $23 and it is worth it.

Thomas Krupinski · « **Reply #3 on:** May 09, 2004, 02:14:26 PM »

I have studied many, many manuals over the years and now just rely on the data provided by the manufactures on their websites. Note that your results may varry considerably.

Just for kicks see if you can look up the old thread on here that has something about "There are old reloaders and there are bold reloaders ...." I think you will find it both amusing and interesting.

Wlscott · « **Reply #4 on:** May 09, 2004, 05:25:04 PM »

Loki, I completely agree with everything said here so far.

That being said.....

I have really good luck with Varget, 50 grain Hornady V Max moly coated bullets, and Federal SR primers in Lake City ARsenal Brass.

Good luck, and have fun.

Loki_762 · « **Reply #5 on:** May 10, 2004, 03:57:33 AM »

Thanks guys. I didn't mean to sound like a kid with a new BB gun - I have just wanted to do this for a LONG time, and I am looking forward to it. I thank you all for your advice on safety, and rest assured, I am planning on becoming an "old reloader".

That being said, is there a good manual that you guys recommend? Not just for loads, but for clarity of instruction for a person new to reloading. Any information or advice is greatly appreciated.

Wlscott · « **Reply #6 on:** May 10, 2004, 04:32:03 AM »

Loki, I have the Nosler and Hornady manuals, plus I download the manual from the Hodgdon webpage. You can find it at www.hodgdon.com

Good luck and be safe.

The Shrink · « **Reply #7 on:** May 11, 2004, 03:29:09 AM »

Loki

Sierra's is excellent, but of course only covers their own bullets. Since their line is so extensive, that's hardly a problem. Hodgdon has gone to a yearly magazine format which can't really pull all the information together. Lyman has been excellent, and Speer has been good.

I've generally found that bullet makers have it all over powder makers when it comes to good manuals for beginners. They tend to talk more about basic issues and talk about ballistics much better. They tend to give you more information about what's going on in the case (interior ballistics) and what happens after the bullet leaves the case (exterior ballistics). This gives you a sense of the forces you are working with and some of the interviening variables. All of this is necessary if you want to understand what is happening when you pull the trigger on your first reload, and all the ones that follow.

Others will give you other favorites. Do you have a sporting goods store locally that carries several? That's the best way to evaluate them.

Wayne the Shrink