« previous next »
Pages: [1]   Go Down

Author Topic: Bentz chambers?  (Read 1770 times)

0 Members and 1 Guest are viewing this topic.

Offline gunnut69

  • Moderators
  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 5005
Bentz chambers?
« on: December 31, 2002, 02:03:24 PM »
Brownells sells a complete conversion kit for the 10/22 ruger.  Made by Volkarsen(sp.) it changes out the bolt, recoil spring, etc...  not sure about the barrel...  I have also wondered  about the 22 short accuracy with slower twists..  good luck from the gunnut69
Logged
gunnut69--
The 2nd amendment to the constitution of the United States of America-
"A well regulated militia, being necessary to the security of a free state, the right of the people to keep and bear arms, shall not be infringed."

Offline jmonto

  • Trade Count: (0)
  • Posts: 2
Bentz chamber
« Reply #1 on: January 10, 2003, 10:58:59 AM »
BW: I breathed on my old '70 model 10/22 awhile back.  I added a new stock and Wilson heavy barrel with a Bentz chamber after the trigger, lockwork and sighting had been done. Fifty-yard  groups improved from an average of about 7/8" to just under 1/2", with prefered ammo. Original groups were around 1-3/8" (all scoped from bench).
Logged
Pages: [1]   Go Up
« previous next »