Author Topic: How much Clearence?  (Read 612 times)

0 Members and 1 Guest are viewing this topic.

Offline GrampaMike

  • GBO Supporter
  • Trade Count: (3)
  • A Real Regular
  • *****
  • Posts: 904
  • Gender: Male
How much Clearence?
« on: June 03, 2004, 03:05:25 PM »
How much clearence between the front end of the scope and the barrel?  I have about 2 business card thicknesses.  Should I go to the next height level on the rings.  Thanks, Mike.
Grampa Mike
U.S. Army Retired

"Say what you mean, mean what you say"
Father of 2 GREAT sons, and 9 grandchildren.

Offline Dave in WV

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 2162
How much Clearence?
« Reply #1 on: June 03, 2004, 03:10:53 PM »
That's plenty of clearance Mike. IMHO the lower the better as long as you can see through the scope without crunching your cheek on the stock comb.
Setting an example is not the main means of influencing others; it is the only means
--Albert Einstein

Offline Zachary

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3713
How much Clearence?
« Reply #2 on: June 03, 2004, 03:31:37 PM »
I agree...that's plenty of clearance.

As long as the scope is not touching the barrel, you're just fine!

Zachary

Offline KN

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1962
How much Clearence?
« Reply #3 on: June 03, 2004, 03:35:18 PM »
I have a couple of rifles that have had the scope covers ground off at the bottom so they would still go over the scope. The closer the better.  KN

Offline Zachary

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3713
How much Clearence?
« Reply #4 on: June 03, 2004, 03:42:05 PM »
Me too! :)  :)  :)

Actually, I cut off the bottom part of the cover so that it would fit.

That's funny.  I though I was the only one that would do something like that. :)

Zachary

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
How much Clearence?
« Reply #5 on: June 03, 2004, 03:58:19 PM »
Sorry guys, but you're not alone, I have 2 scopes mounted so low I had to cut a slot in the bottom of the cover so they would fit, one of em is my elite 4200 on my CZ452 17hmr. The other is a brand I can't mention. :roll:
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline GrampaMike

  • GBO Supporter
  • Trade Count: (3)
  • A Real Regular
  • *****
  • Posts: 904
  • Gender: Male
How much Clearence?
« Reply #6 on: June 04, 2004, 03:25:13 AM »
Thats Funny...  That is why I asked the question, because the scope cover would not fit.  I was thinking that I would have to cut the covers somehow so it would go on.  Thought maybe the scope was too close to the barrel, so I would ask here before I did it.  Thanks, I feel at alot better.  Mike
Grampa Mike
U.S. Army Retired

"Say what you mean, mean what you say"
Father of 2 GREAT sons, and 9 grandchildren.

Offline Zachary

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3713
How much Clearence?
« Reply #7 on: June 04, 2004, 05:11:14 AM »
Quote from: quickdtoo
Sorry guys, but you're not alone, I have 2 scopes mounted so low I had to cut a slot in the bottom of the cover so they would fit, one of em is my elite 4200 on my CZ452 17hmr. The other is a brand I can't mention. :roll:


quickdtoo,

Boy you got us curious. :)   Why can't you mention what the other brand is? :grin:

Zachary