« previous next »
Pages: [1]   Go Down

Author Topic: best powders for .357 max 10 inch barrel  (Read 938 times)

0 Members and 1 Guest are viewing this topic.

Offline Smokin54

  • Trade Count: (0)
  • Member
  • *
  • Posts: 63
best powders for .357 max 10 inch barrel
« on: January 11, 2003, 05:02:27 AM »
I am struggling with this .357 max 10 inch barrel , with 2400 it was hard to keep the holes on the paper . I changed to AA1680 and things improved greatly but I dont think it is up to the potential of the barrel ,my shooting partner belives I am sprayin unburnt powder and the muzzle blast is fierce  .I was thinking of trying 296 next .I have been shooting 170 and 180 grain bullets using a mild crimp.
Any thoughts ??
Thanks
Logged

Offline OLDMAN

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 100
Best powders for 357 Max
« Reply #1 on: January 11, 2003, 07:12:25 AM »
Smokin,
     You will get greater FPS with W H110.  I ask a similar question on this forum a while back and I was told to try IMR 4227.  I have never gone back to the H110.  Much better groups although you will lose some FPS I think.
Logged

Offline Bullseye

  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 1879
best powders for .357 max 10 inch barrel
« Reply #2 on: January 11, 2003, 10:27:42 AM »
I have used IMR 4227 for years with 180 gr. XTP's.  I have also heard that the 296 is good but have never tried it since mine shoots so good with 4227.  I think you are right though, the 296 is a little faster but all the deer I have shot with mine never complained about the speed.
Logged

Offline hankbrass

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
best powders for .357 max 10 inch barrel
« Reply #3 on: January 11, 2003, 11:05:56 AM »
Don't think you will get away from the horrendous muzzle blast with a ten inch pipe. A 14 inch barrel makes a pussycat out of this round though and it is much more enjoyable to shoot. :D

                     WA Engle NRA Patron Member
Logged

Offline Bullseye

  • Trade Count: (9)
  • Senior Member
  • *****
  • Posts: 1879
best powders for .357 max 10 inch barrel
« Reply #4 on: January 11, 2003, 01:16:17 PM »
Don't agree with you hankbrass.  The muzzleblast is not bad at all from a 10" barrel using IMR 4227.  It is one gun that does not bother my ears at all when hunting without earplugs.  I would venture to say that it would be a lot louder with Win 296 for some reason.  My 41 Mag and 44 Mag sound totally different (lot louder and more percussion) when using 296 over 4227.  I assume this comes from the higher velocity.
Logged

Offline Gregory

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1482
  • Gender: Male
best powders for .357 max 10 inch barrel
« Reply #5 on: January 11, 2003, 01:17:49 PM »
I got good advice from this forum when I was working up loads for my 10" Armour Alloy 357 Max.  I have two very accurate loads, both use the hornady 180 XTP.  One is with IMR4227 and one uses 296.  I settled on the 296 load as MV is much better.   I use small rifle benchrest primers.
Greg

BTW 296 and H110 are equivalent powders
Logged
Greg

NRA Endowment Life Member
the right of the people to keep and bear arms shall not be infringed.
Second Amendment, U.S. Constitution (1791)

Offline MF

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 151
.357 max loads
« Reply #6 on: January 11, 2003, 02:15:53 PM »
I just came in from sighting in my 14" max for next weeks pig hunt. I use 20.5 grains of Imr 4227 and the 180 grain Hornady sspb. I've used H-110 and it does have a higher velocity but I've found my accuracy loads with the Imr 4227. My .02 8)
Logged

Offline PJ

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 500
best powders for .357 max 10 inch barrel
« Reply #7 on: January 11, 2003, 05:27:43 PM »
lil-Gun :D
Logged
Pages: [1]   Go Up
« previous next »