« previous next »
Pages: [1]   Go Down

Author Topic: 15 and want to start reloading  (Read 1583 times)

0 Members and 1 Guest are viewing this topic.

Offline AKA Craig

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 111
15 and want to start reloading
« on: December 12, 2002, 03:24:16 PM »
hey i am 15 and want to start reloading i shoot alot and this would pay off but i dont know what to tell my parents to buy me for christmas there is a website called       www.redding-reloading.com and click on online catalogue and go to reloading kits i dont know what all i have to have to do it it is called the boss pro pack for   $324.00 i would appreciate it if yall would check it out and tell me what yall think

                        Craig
Logged
Very Proud and Patriotic Texan.

Nothing to fear but fear itself

Offline KN

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1962
15 and want to start reloading
« Reply #1 on: December 12, 2002, 04:05:16 PM »
That doesn't seem like too good a deal to me! Your going to need a good powder dump and a case trimmer. Thats extra in the stuff your looking at. Check out the RCBS kits.  The RCBS Rock Chucker Single Stage Press Master Reloading Kit from Midway USA looks like a good deal for alot less money. Stay away from the Lee stuff, Their dies are ok but in my opinion most of there equipment is junk. I bought a Lee aniversary kit once and ended up throwing most of it away.
Logged

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
15 and want to start reloading
« Reply #2 on: December 12, 2002, 05:16:52 PM »
RCBS Rock Chucker Master Reloading Kit and the RCBS Accessory Kit.  That should give you everything you need to get started at a reasonable price, and the equipment included will last you a lifetime.
Logged

Offline Daveinthebush

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1732
Find a teacher!
« Reply #3 on: December 12, 2002, 05:22:49 PM »
Craig: You might want to ask around your town to see if anyone else reloads.  Check the gun shops in the area and even put up a card or two. When I first started my neighbor took me under his wing and showed me enough to keep me out of serious trouble.  Reading is good, but actually watching some else doing something and then doing it yourself under a watchful eye --- better!

Good luck!  What part of Ak are you in?
Logged
AK Bowhunting Certification Instructor
AK Hunter Certification Instructor
IBEP Bowhunting Certification Instructor

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18262
15 and want to start reloading
« Reply #4 on: December 12, 2002, 10:59:17 PM »
youll see a lot of people on here bad mouthing lee stuff but I dont think youd go wrong buying the lee master kit. The stuff isnt top of the line but its all serviceable and its a cheap way to get into reloading. It will last quite a few years and if you find you really enjoy it you can allways update some of the material. that way you can find out what you like in equipment. You may end up wanting a progressive press ect. I have alot of lee stuff mixed in with my gear and I still use it almost daily
Logged
blue lives matter

Offline .45 COLT

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 319
15 and want to start reloading
« Reply #5 on: December 13, 2002, 02:38:40 AM »
Craig - Read Daveinthebush's post again. That's probably the best advice you can get. When I started reloading I knew too much to be slowed down by anybody. Many stuck and dented cases later I found a person with experience to guide me and what a difference! Kemp's a small place, but there must be a few reloaders in the area willing to help.
Unlike some others, I like Lee products. For the money, they can get you started pretty well. Later, if your interest continues, you can upgrade.
Logged
On the 19th of April, 1775, a tyrannical government sent an army to disarm its citizens. They ran into a touch of trouble.

Offline AKA Craig

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 111
hey thank yall
« Reply #6 on: December 13, 2002, 08:00:00 AM »
i dont know ANYTHING about it i dont even now what a tumbler is or anything i dont really care about saving money i just think it would be fun to reload,i dont know what kind of powder or anything. what do you mean lube my shells? see i just had an idea that it would be fun and cool to do it and a good hobby or something to do. kemp is a real small place there is no one i know who reloads there is no gunshops in kemp the closest one is about 20 miles and i have no car or nothing and my mom dont like driving me no where i know i can get them to buy me tghe stuff i need for christmas i just need to know what all i need as long as i can get EVERYTHING i need for under or at $ 450.00 preferably under well ttyl and thanks for all the reply, bot yall sure can reply fast oh and i live in texas not ak  

                            Craig :grin:
Logged
Very Proud and Patriotic Texan.

Nothing to fear but fear itself

Offline ricciardelli

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1004
  • Gender: Male
    • http://stevespages.com/page8.htm
Re: hey thank yall
« Reply #7 on: December 13, 2002, 10:38:21 AM »
Quote from: AKA Craig
i dont know ANYTHING about it i dont even now what a tumbler is or anything i dont really care about saving money i just think it would be fun to reload,i dont know what kind of powder or anything. what do you mean lube my shells? see i just had an idea that it would be fun and cool to do it and a good hobby or something to do. kemp is a real small place there is no one i know who reloads there is no gunshops in kemp the closest one is about 20 miles and i have no car or nothing and my mom dont like driving me no where i know i can get them to buy me tghe stuff i need for christmas i just need to know what all i need as long as i can get EVERYTHING i need for under or at $ 450.00 preferably under well ttyl and thanks for all the reply, bot yall sure can reply fast oh and i live in texas not ak  

                            Craig :grin:


If you get the stuff I told you to get, the cost should be around $310.  You will need a set of dies and a shell holder for each caliber you are planning on reloading.

Before you start worrying about all the details, read the reloading manual that comes with the set at least three times.  Then if you have questions, do not be afraid to ask...

Throwing powser, cases, primers and bullets together comes later in the game...
Logged

Offline Old Syko

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 2263
  • Gender: Male
15 and want to start reloading
« Reply #8 on: December 13, 2002, 10:47:55 AM »
:D Lot of good info here fur sure.  The first thing you need is all the info you can handle before you spend a nickle.  Dean Grennell authored a book called The ABC's of Reloading that I consider to be great for beginners.  Some of the info you need to attain about loading makes for some very dry reading but Mr. Grennell lightens it up quite a bit.  As an example, to paraphrase an excerpt from the book he states that although most people think that booze and gunpowder don't mix, he's discovered that it actually does mix but tastes like #$%^.  

Get this book and read it, then get on here and ask questions.  At 15 you'll catch on to reloading quicker than us antiques catch on to these dumb computers.
Logged

Offline Daveinthebush

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1732
Here are some links for you.
« Reply #9 on: December 13, 2002, 03:40:39 PM »
Craig: The one thing that you will have to check first is; "Are you old enough to buy gun powder and primers in Texas?" You may have to find someone to buy the componets for you!

http://www.loadyourown.com/howto.asp
http://www.accs.net/users/drquick/#MY%20SITE%20MAP
http://www.rcbs.com/
http://www.reload-nrma.com/
http://www.reloadammo.com/
http://www.imrpowder.com/

Read.........................It is the key to your success! :agree:
Logged
AK Bowhunting Certification Instructor
AK Hunter Certification Instructor
IBEP Bowhunting Certification Instructor

Offline AKA Craig

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 111
yeah
« Reply #10 on: December 13, 2002, 06:03:34 PM »
i can get my mom to buy the stuff i just have to give her my money how much does powder and primers cost,oh by the way it is a .270 i might also reload for a .222 and a .223 possibly a 30/30 but i am going to do my .270 for sure if i buy the manaul and my mom and dad dont get me it for christmas then what do i do? guess i will know about it if i ever buy it myself i cant buy it myself i will have to get the kit that that riccardillo guy told me to get it says it comes with a manual i will get it then if i get the stuff for CHRISTmas but i would ike to read some stuff on the net about it well ttyl oh and by the way thanks for all yalls help i really appreciate it

 oh what exactly is die?

             Craig
Logged
Very Proud and Patriotic Texan.

Nothing to fear but fear itself

Offline Daveinthebush

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1732
One place to look.
« Reply #11 on: December 13, 2002, 06:28:29 PM »
1.  Read the information at the sites that I gave you.
2.  Make a list of the equipment that you will need.
3.  You can try E-bay, of course your parents will have to let you use a credit card.  There is a lot of reloading equipment for sale there.
4.  You could pay your parents back after each piece, as kind of a "good faith" gesture.
5.  If your unsure of the items on ebay are any good, do a post here and ask the guys of their opinions on the items.  I bought a really great press there for a good price.  Check the bid prices out by shopping for the item on the internet.  For instance: I need some more .35 Whelen brass.  There was some for sale but Midway had brand new brass for sale for slightly more.  Sometimes better to spend a little more and be safe.
6.  Most of us here have built our equipment up over the years.  I started from scratch a few years back after loosing all my equipment.  I bought a Lyman hand press for $19 new.  I can't tell you how much I reloaded on that little thing untill I could afford a press again.  
7.  Good things come to those that wait. Be patient.

I can't tell you what components cost down there. A 1 lb. can of powder in my town is $28.  But if you think you are remote, try Alaska!
Logged
AK Bowhunting Certification Instructor
AK Hunter Certification Instructor
IBEP Bowhunting Certification Instructor

Offline HoCoMDHunter

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 118
15 and want to start reloading
« Reply #12 on: December 16, 2002, 04:13:03 PM »
AKA,
    I had to start out on a budget and got the Lee Anniversary set ( I am married, if I was 15 I would have been able to afford much better :wink: ).  My advice would be to start small and work your way up.  I have been fairly pleased with my kit and have loaded about 3000 rounds of pistol ammo with it.  I purchase the primers and powder from the Outdoor World that I am fortunate enough to be nearby.  If you have to mailorder the powder and primers you had better order in bulk, because you have to pay the extra money for HazMat shipping per box and primers and powder cannot be shipped in the same box.   Get one of your friends that has a license to take you to a good gun shop that carries this stuff.  The rest you can get online.  These fellas have given you some very good advice already, I hope this helps some.  Most of all, be careful.  Pay attention to what you are doing and don't be distracted.   Pay particular attention to not double charging your cases.  Good luck.
Logged
Doin' my best to keep up with Maryland's one handgun a month law.

Offline Rhett

  • Trade Count: (0)
  • Member
  • *
  • Posts: 18
15 and want to start reloading
« Reply #13 on: January 16, 2003, 08:16:43 AM »
I'm too newbiotic to give any info on reloading itself,(I just started late last year,) but if you need any books on anything check eBay!   Got two of my books there and they were dirt cheap.  Ebay gets so many books on the site that they all go for bargain prices.
Logged
Time is the fire in which we burn.

Offline Cheyenne Ranger

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1111
15 and want to start reloading
« Reply #14 on: January 16, 2003, 08:24:06 AM »
anyone hear back from Craig??  Would be nice to see how he's doing.  And does anyone know what Kent, TX is close to?  He might want to make a road trip to see the reloading in action.  I know there are enough of us in TX that would give him a "show and tell" for a day.
Logged
SASS 48747L
RO II
Thunder River Renegades
SBSS #1170--OGB

Offline L-Roy

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 198
Reloading info
« Reply #15 on: January 17, 2003, 09:18:23 PM »
Craig, and others,
Be sure you use reloading manuals correctly.  Be sure to use the manual for the BULLET to be loaded.  Bullet weights may be the same, but more data is taken into consideration other than weight when data is developed.

For instance: For Nosler bullets, use Nosler's information, not Sierra's,  Hornady's or someone else's.
Logged
I am, therefore, I think.

Diligentia, Vis, Celeritas

Don M.
Pages: [1]   Go Up
« previous next »