« previous next »
Pages: [1]   Go Down

Author Topic: need help,win 97  (Read 356 times)

0 Members and 1 Guest are viewing this topic.

Offline EdSmith

  • Trade Count: (0)
  • Member
  • *
  • Posts: 61
need help,win 97
« on: November 19, 2004, 09:41:08 PM »
I am building a 97 from parts,I have all the parts except a few,which are on the way,I am puzzled on the ejector,in the nra parts exploded view,it shows an ejector spring,I can see where that goes,but there is a t shaped part called a ejector pin,where does that go?also on the take down,it says to turn the mag. tube and pull it forward about 2 in.what about the action slide,does it just comes out,or does it have to be disengaged some how ? these 97s are a bear to put together.thanks ahead of time :toast:
Logged
if it ain''''t broke,you ain''''t trying hard enough :D

Offline Flash

  • Trade Count: (82)
  • Senior Member
  • *****
  • Posts: 2285
  • Gender: Male
need help,win 97
« Reply #1 on: November 20, 2004, 01:59:10 AM »
Post this in the Gunsmithing forum, you'll probably get more takers there.
Logged
What doesn't kill us, makes us stronger!

Offline Shorty

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1098
need help,win 97
« Reply #2 on: November 20, 2004, 12:14:32 PM »
EdSmith,
The "ejector" on a '97 is a L shaped flat spring that is screwed on from the outside of the reciever.  Maybe you're thinking of the "extractor".  That is similar to most guns, with a hook, spring, and pin to pivot within the bolt.
Upon turning the magazine out, the action bar will come with it.
Logged
Pages: [1]   Go Up
« previous next »