Author Topic: Air rifle trigger jobs? (Read 666 times)

TC Shooter · « **on:** August 22, 2004, 07:33:04 PM »

I have a Beeman R7 and even though the trigger is pretty decent out of the box - very crisp , I would prefer a lighter pull. I adjusted the trigger screw but still not quite where I would like it to be.

I was shooting the R7 today with a newly mounted red dot sight and shot the best group I ever shot with this rifle. With a lighter trigger I feel I could have done better yet.

Anyone know if an air rifle smith can safely lower it below the factory settings?

VictorLouis · « **Reply #1 on:** August 23, 2004, 08:25:40 AM »

Yes, they can safely milk it down to a downright scary setting from what I understand. The important part, though, is the fact it will shoot much smoother after a tune. This will help your follow-through, and your accuracy will increase as a result.

drags · « **Reply #2 on:** August 29, 2004, 06:20:51 AM »

Hi TC I had Russ Best do my r7 trigger it is about a pound or a little less, he did a very good job. You can contact him trough www.straightshooters.com
Drags

TC Shooter · « **Reply #3 on:** August 29, 2004, 06:28:16 AM »

Thanks for the replys - yeah , a crisp one pound or less would do fine! I will contact Russ and see what he says.

Dand · « **Reply #4 on:** August 29, 2004, 08:05:54 PM »

Russ is supposed to be excellent at tuning springers - I've seen many rave reveiws. Don't know if this link is current but you might try reaching him at: http://www.airgunshow.net/Bestunes.htm

dave · « **Reply #5 on:** August 30, 2004, 12:48:55 PM »

Russ can be reached at cscbestunes@aol.com or
http://www.airgunshow.net/Bestunes.htm