Author Topic: resizing bullets for the 375 Win  (Read 632 times)

0 Members and 1 Guest are viewing this topic.

Offline handirifle

  • GBO Supporter
  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 3570
    • http://www.handirifle.com
resizing bullets for the 375 Win
« on: September 05, 2004, 10:31:50 PM »
I have a 375 win and was wondering if it is practical to buy bullets sized for the 38-55 (typically .378-.380) and resize them to .375-.377 for use in my 375 WIn.  There is a lot better selection of those.
God, Family, and guns, in that order!

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
resizing bullets for the 375 Win
« Reply #1 on: September 06, 2004, 01:27:03 AM »
Your mileage may vary, but try them unsized first, then size to what you do for the 38-55 before you spring for the .375 dia sizer.  My '94 big bore does just fine with unsized or minimally sized bulltets as cast.
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline handirifle

  • GBO Supporter
  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 3570
    • http://www.handirifle.com
resizing bullets for the 375 Win
« Reply #2 on: September 06, 2004, 11:30:02 AM »
Cat
What dia do your cast at?
God, Family, and guns, in that order!

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
resizing bullets for the 375 Win
« Reply #3 on: September 06, 2004, 01:20:22 PM »
Measured to be .378 diameter as-cast, 278 gr HARD (fingernail won't scratch - linotype or equivalent) Lyman #375449  (264gr) GC FN   

Haven't had the time (wimp excuse) to try it in the .375 H&H yet.
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline handirifle

  • GBO Supporter
  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 3570
    • http://www.handirifle.com
resizing bullets for the 375 Win
« Reply #4 on: September 07, 2004, 08:00:26 PM »
Maybe I'll give some a try.  What the heck is that picture of cat whisperer?
God, Family, and guns, in that order!

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
resizing bullets for the 375 Win
« Reply #5 on: September 08, 2004, 12:35:04 AM »
Quote from: handirifle
Maybe I'll give some a try.  What the heck is that picture of cat whisperer?


4.55" bore diameter Coehorn Mortar.  Shoots 4" (4.500" OD) PVC pipe filled with concrete.  7.5 lbs goes 350 meters with 2 film canisters of FFg or FFFg.
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline handirifle

  • GBO Supporter
  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 3570
    • http://www.handirifle.com
resizing bullets for the 375 Win
« Reply #6 on: September 09, 2004, 07:32:18 PM »
No way! two film canisters of powder send that 7.5 lb projectile 350 meters?  Man, it sure is easy to underestimate power of powder.
God, Family, and guns, in that order!

Offline Cat Whisperer

  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 7493
  • Gender: Male
  • Pulaski Coehorn Works
resizing bullets for the 375 Win
« Reply #7 on: September 10, 2004, 12:49:05 AM »
Quote from: handirifle
No way! two film canisters of powder send that 7.5 lb projectile 350 meters?  Man, it sure is easy to underestimate power of powder.


Yea.  It really should be further, but the barrel is short (the 7.5 lb projos fill the entire barrel).

Same design, I have one in 16-20-24 oz soda-pop-bottle caliber.  A 24 oz-er will go well over 1000 meters.  Don't know exactly, it was still going up when it cleared the mountain in the back stop area.  24" tube.

Big bore is OK.
Tim K                 www.GBOCANNONS.COM
Cat Whisperer
Chief of Smoke, Pulaski Coehorn Works & Winery
U.S.Army Retired
N 37.05224  W 80.78133 (front door +/- 15 feet)

Offline txpete

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 195
  • Gender: Male
resizing bullets for the 375 Win
« Reply #8 on: September 10, 2004, 05:12:22 AM »
I have sized my cast bullets .376 and .377 for my BB 94 375 win.the .377 shoot/group the best.
for my 38-55 win 94 I shoot them as cast .380-.381
pete

Offline handirifle

  • GBO Supporter
  • Trade Count: (3)
  • Senior Member
  • *****
  • Posts: 3570
    • http://www.handirifle.com
resizing bullets for the 375 Win
« Reply #9 on: September 12, 2004, 04:22:58 PM »
What velocities do you push (or keep under?) for cast bullets in the 375 Win?
God, Family, and guns, in that order!