« previous next »
Pages: [1]   Go Down

Author Topic: Springfield Armory 1911  (Read 957 times)

0 Members and 1 Guest are viewing this topic.

Offline WildBill

  • Trade Count: (0)
  • Member
  • *
  • Posts: 56
Springfield Armory 1911
« on: August 31, 2004, 08:50:27 AM »
I have been thinking about buying a 45 ACP 1911 for a carry and tac shooting gun. Anyone got one or can give me a little insight as to wheter or not this is a dependable good shootin' rig. Looked at one of my friends he likes his ,told me I could give it a whirl ,think I will have to take him up on that. Not much of a huntin' cartridge but I have always wanted one for some reason,guess its just an excuse to own another gun. Well any input is appreciated.  :lol:
Logged

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18269
Springfield Armory 1911
« Reply #1 on: August 31, 2004, 12:54:28 PM »
probably the best bang for the buck in a .45acp. I like my champion. It isnt as accurate as my kimber but it cost less and is reliable.
Logged
blue lives matter

Offline greenjeans

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 583
Springfield Armory 1911
« Reply #2 on: August 31, 2004, 03:08:56 PM »
Just got the full size GI Mil Spec. a couple of weeks ago and really like it. I have only put around 150 rounds of hardball through it and have had absolutely no failures of any kind. Have the factory mag that game with the pistol and one Chip McCormick 8 round. Both have functioned flawlessly. Mine seems to shoot just a hair left, but that could just be me. First pistol of this type I have owned. Am looking for the Champion 4" version now. I did put Hogue rubber grips on mine, the diamond checkered type. I think you would be happy.
Logged
Romans 8:38,39

Offline Mikey

  • GBO Supporter
  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 8734
Springfield Armory 1911
« Reply #3 on: September 01, 2004, 02:08:42 AM »
WildBill - you can't go wrong with a Springfield.  Got one - won't give it up.  Mikey.
Logged

Offline IntrepidWizard

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1130
Springfield Armory 1911
« Reply #4 on: September 01, 2004, 04:03:15 AM »
I hae always stuck to Colt,my 1943 Hard chromed Bob Chowed Colt I carried over 25 years until I got the CGP two years ago,there is none finer ,dependable and right on like the new CGP.
Logged
Government is not reason; it is not eloquence; it is force! Like fire, it is
a dangerous servant and a fearful master. -- George Washington

Offline southern utah

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 470
    • http://www.jsi-guns-hunting-firearms.com
a
« Reply #5 on: September 01, 2004, 07:20:24 AM »
Got Colts and a Springfield ( loaded).  Wished the Springfield was Stainless like my Colt . The Springfied doesn't have all the slide safty crap like the Colt ( had it hang up in the middle of a qualifacation shoot) Get the loaded package and they give you a card to get all sorts of stuff real cheap.
Logged

Offline Spencer

  • Trade Count: (1)
  • Avid Poster
  • **
  • Posts: 220
Springfield Armory 1911
« Reply #6 on: September 17, 2004, 02:00:15 PM »
Springfield 1911A1 in 9mm.  400 rounds and only one jam. (Lead bullet)  The only problem I have had is the rear site slid out of the dovetail while I was shooting.  I have not gotten around to fixing it yet though.  I give the Springfield a A++++
Logged
A bad day of hunting is better than a good day at the golf course.

Offline Wlscott

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 987
Springfield Armory 1911
« Reply #7 on: September 17, 2004, 03:32:19 PM »
I have the Springfield Compact Carry in 45ACP and wouldn't give it up for any amount of money.

A carry gun is supposed to go bang every time you pull the trigger.  This one has never failed me.  I started shooting it in IPSC last year.  The only misfire I have ever had was when I tried some Wilson Combat magazines.  Once I had the feed lips reformed, never had another problem.

I've shot 185 grain hollow points, 230 grain FMJ, 230 grain lead cast, and it will digest 'em all.
Logged
You haven't hunted......Until you've hunted the hunters

Offline Redhawk1

  • Life time NRA Supporter.
  • GBO Supporter
  • Trade Count: (78)
  • Senior Member
  • *****
  • Posts: 10748
  • Gender: Male
Springfield Armory 1911
« Reply #8 on: September 17, 2004, 05:20:19 PM »
I have the Springfield Mil-Spec 45ACP 1911. Out of the box it was a tack driver. The accuracy and function of this gun is outstanding. I added a bunch of Wilson Combat parts to make the gun look nice and function even better. I added a 2 piece guide rod, new sear, skeleton hammer, beavertail, extended slide release,mag well, and Hogue grips. The gun out shot my Kimber Stainless Target II. I still have my Springfield but not my Kimber. You won't be disappointed with a Springfield.  :D
Logged
If  you're going to make a hole, make it a big one.
ΜΟΛΩΝ ΛΑΒΕ
Only two defining forces have ever offered to die for you,
Jesus Christ and the American G. I.
One died for your soul, the other for your freedom

Endowment Life Member of the NRA
Life Member NA

Offline leverfan

  • Trade Count: (8)
  • A Real Regular
  • ****
  • Posts: 823
Springfield Armory 1911
« Reply #9 on: September 17, 2004, 06:50:05 PM »
I had a Springfield 1911 that I foolishly traded away, and I wish that I still had that Springfield.  It was a great gun, 100% reliable with all reloads and factory ammo that I fed it.
Logged
NRA life member

Offline S.B.

  • GBO Supporter
  • Trade Count: (6)
  • Senior Member
  • *****
  • Posts: 3953
  • Gender: Male
Springfield Armory 1911
« Reply #10 on: September 26, 2004, 02:13:17 PM »
I still own two Colts in .45 ACP. One is a box stock series 70, the other a full house Heinie comp gun. Like them both, very much. Use a conversion unit on the stock gun when I'm low on money and shoot the low cost .22 LR's.
Logged
"The Original Point and Click Interface was a Smith & Wesson."
Life member of NRA, USPSA,ISRA
AF&AM #294
LIUNA #996 for the past 34 years/now retired!

Offline DWARREN123

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 157
Springfield Armory 1911
« Reply #11 on: October 05, 2004, 06:05:11 AM »
I have a new 1911 A1 with the shiny slide sides, first time shooting and the top left grip screw head popped off, damn, I love this thing. It is accurate and dependable.
Logged

Offline greenjeans

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 583
Springfield Armory 1911
« Reply #12 on: October 05, 2004, 01:51:22 PM »
I have the Springfield GI full size and love it. 100% reliable out of the box so far. Don't have butf a couple of hundred rounds throught it, but not one malfunction of any kind. I also have the Springfield Ultra Compact and had the same experience with the rear sight coming loose during the first box I shot through it. Gunsmith at my gun shop fixed it for no $ and no problems. Love both of them. The Ultra has become my primary carry gun in a Fobus paddle. :grin:
Logged
Romans 8:38,39

Offline Thebear_78

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1006
Springfield Armory 1911
« Reply #13 on: October 05, 2004, 02:27:05 PM »
I have a Springfield Loaded Operator. It is the one with the full length light rail.  It is a fantastic shooter.  I put a set of hogue finger groove wrap around grips on it.  They really fill out my large hands very well and are very comfortable.

I haven't mounted a light on it yet but I did notice that the extra wieght of the light rail helps with muzzle flip when doing rapid fire drills.  I think the weight of the light would help even more.   I'm planning on putting a surefire  LED light on it.  

I normally perfer a 6 o'clock hold for my pistols but try as I may this gun always hits point on at 25 yards.  I have tried several different typs of ammo and they all seem to print in the same 3" group at 25 yards.  The 3" group is a mixed ammo group, groups shot with 230gr hydroshock federal premiums will regulary group inside 2" at 25 yards.  

I really can't complain about that kind of performance.   I have been using  it with wilson 8rd and a micormic 10rd magazine and have had no FTF.  The only failure I have had at all was with blazer 200gr HP ammo, I had one stovepipe on me.  This really isn't that bad considering I have shot several thousands of rounds thru this gun so far and I contribute that failure to a long day at the range and the gun being dirty.    

My only other only other 1911 that has proven so reliable is my colt commander which has never had any failures of any kind, it  also won't group anyware near the springfield, 7" groups at 25 yards are the norm.  I don't think you could go wrong with the springfield 1911s.



Logged

Offline Mikey

  • GBO Supporter
  • Moderator
  • Trade Count: (2)
  • Senior Member
  • *****
  • Posts: 8734
Springfield Armory 1911
« Reply #14 on: October 06, 2004, 04:10:21 AM »
TheBear_78:  sounds like your Colt Commander and mine have the same tendencies, preferring to shoot large groups.  I fixed that problem with an Ed Brown drop-in accuarcy barrel and the difference is incredible.  I now have two 45s that will shoot under 2" at 25 yds with hardball - can't argue with that.  

I tricked out my Springfield Government Model to get the most out of its accuracy potential and when I saw how successful that was I went and did the same barrel swap on my Commander - haven't been sorry at all.  HTH.  Mikey.
Logged

Offline DanielWGriggs

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 317
Springfield Armory 1911
« Reply #15 on: October 20, 2004, 09:12:00 AM »
The wife has one and I get permission to shoot it once in a while. I get to reload for it all the time with a dillon 550b. That should tell you something.  She has problems with fte due to her limp wristed hold. I have had no problems with the pistol and my reloads 200gr swc and 230gr rnfp last batch was 200gr rnfp. Nice light load and takes the pins clean off the table. accuracy with any thing I have check it with has been acceptable at 25yds 2" or less. I polished the ramp with a dremel and chrome polish when we got it over 8 years ago and have never had a ftf. I can honestly say 2000+ rounds and I would not trade this pistol fit  and finish are still tight and 95%. It is the one kept loaded next to the bed on her side.   You won't regret buying and owning this pistol.
Logged

Offline TScottO

  • Trade Count: (2)
  • A Real Regular
  • ****
  • Posts: 778
Springfield Armory 1911
« Reply #16 on: October 20, 2004, 01:26:12 PM »
It depends on how much money you are willing to spend and what kind of options you want.

The Springfield GI series are probably the best buy for a 1911 with out frills.

If you want a better quality gun in the 600-800 dollar range with some eye candy I would go with Kimber. The new extractor Kimber uses is a good improvement.

The tightest fitting production run 1911 on the market is STI International. These are probably the best production 1911 made. They aren’t inexpensive but if you ever get to look at one you will know why. They will be in the $800+ category.

I personally do not consider Colt when looking for 1911’s. The series 80 Gvt mod I have is a $700.00 piece of junk. I would hope Colt has improved their quality since I bought mine. That was around 10 years or so ago. The slide has horrendous side to side play. The barrel bushing is loose as a goose as well as the barrel lock up. This gun would jam 3 times in an eight round clip with no exception and accuracy is very poor. The AR15 I purchased came with a broken safety spring from the factory. For some reason or another I have had real bad experience with Colt products.

Be Safe,
Scott
Logged
Pages: [1]   Go Up
« previous next »