Author Topic: Sighting in methods  (Read 805 times)

0 Members and 2 Guests are viewing this topic.

Offline joecoie

  • Trade Count: (0)
  • Posts: 1
Sighting in methods
« on: October 10, 2004, 02:36:37 PM »
I would like to get opinions on the best way to sight in for the different
distances used in SB Rifle Silhouette. Is there a rested (steady) position
which will give settings which would be transferable to the standing
position, with or without a consistent offset ?
Secondly when I have my settings which work on our range, what if any,
changes will I have to make when shooting on other ranges e.g. where the
bays may be at different relative heights to the shooters position ?

Tks

Offline jimann

  • Trade Count: (9)
  • Avid Poster
  • **
  • Posts: 143
Sighting in
« Reply #1 on: October 10, 2004, 03:13:21 PM »
I'm not an expert...But the way I sight in is, off a bench with the sand bags on the rifle where I put my hand. Which for me is just in front of the trigger guard. When I stand up, I cannot tell any differences in the zeros.
     For your second question I sight in before every match at every range. And the sight zeros will change. Why (?) Blame the weather, the moon, or here in California earth quakes.
     Hope this sheads a little light on the subject. It may get someone that really know to speak up.
jimann

Offline davei

  • Trade Count: (0)
  • Member
  • *
  • Posts: 71
Sighting in methods
« Reply #2 on: October 10, 2004, 03:26:23 PM »
i sight in off-hand.  no worries about changes from the bench and don't have to carry around a rest.  but then i also herd sheep competitively and antique shop...  so i don't know if you should be listening to me.  :)
dave imas

Offline lucho

  • Trade Count: (0)
  • Member
  • *
  • Posts: 79
Sighting in methods
« Reply #3 on: October 10, 2004, 05:07:06 PM »
Dave

Antique shop?????

Do you have a new girl friend?


Lucho

Offline dave imas

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 215
Sighting in methods
« Reply #4 on: October 11, 2004, 03:52:40 PM »
My very Excellent Friend Lucho,

Not a new girlfriend...  just a small attempt at diminishing the echo in my very empty home!

dave

Offline Grasshopper52

  • Trade Count: (0)
  • Member
  • *
  • Posts: 11
Sighting in methods
« Reply #5 on: October 11, 2004, 08:59:38 PM »
Dave good buddy,

Just as long as it passes inspection of the wonderful lady that makes the fantastic pies :grin:  

You are not allowed to upset her! :evil:

Jim

Offline billdncn

  • Trade Count: (0)
  • Member
  • *
  • Posts: 81
Sighting in methods
« Reply #6 on: October 11, 2004, 10:40:18 PM »
joecoie. I benched my rifle @ 40m. Then stand and shoot 10 shot groups (2-3 atleast) to see where I'm hitting in the offhand position. Adjust accordenly. Move to 60m repeat, and so on.....

I'm not smart enough to compensate for weather changes, sun, shade, etc. which is probally one of the reasons I'll never make Master. If the range allows sighting in prior to the Match I may make small adj. on elevation if needed for that day.

Offline shootingpaul

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 207
    • http://www.shootingpaul.netfirms.com/
Re: Sighting in methods
« Reply #7 on: October 13, 2004, 11:20:49 AM »
the affects for your bullet impact will be temperature, humidity, and elevation to the sea level, I think that it is not wise  not to check your zeroes before competition, not only any of the factors could affect your zeroes but also maybe some strange shakeup during transportation,
most of the time your zeroes will be the same so only what you are wasting is few shots (20 at the most) just to reasuring yourself.
shootingpaul

please feel free and visit my site at:
http://www.shootingpaul.netfirms.com

GOLF COURSE? - A TOTAL MISUSE OF THE PERFECT RIFLE RANGE!