Author Topic: .54 Hawken w/ 1-48"twist and R.E.A.L bullets?  (Read 766 times)

0 Members and 2 Guests are viewing this topic.

Offline WNC

  • Trade Count: (0)
  • Member
  • *
  • Posts: 41
.54 Hawken w/ 1-48"twist and R.E.A.L bullets?
« on: October 12, 2004, 07:49:46 AM »
My brother just picked up a used TC Hawken in .54 and he's thinking about using R.E.A.L bullets in it with the 1-48" twist.
Wondering if anyone has tried these and how they shot?


Thanks a bunch
"I don't know 'nuttin 'bout 'chinery. Whatche shoot with that?"

Offline Good time Charlie

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 156
REAL Bullets
« Reply #1 on: October 12, 2004, 10:40:22 AM »
I shoot 320 grain REAL bullets in my .50 cal. TC Hawken and they do a good job. They shoot better than prb for me in the 1to 48 twist.
                               Old Charlie

Offline Thomas Krupinski

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 823
.54 Hawken w/ 1-48"twist and R.E.A.L b
« Reply #2 on: October 12, 2004, 11:19:36 AM »
A while back I have shot them out of a .54 Renegade 1:48 and they worked pretty well.  I was using the heavier ones, I think I remember that they weighed out at 430 grains.

Just keep trying till you find the charge of blackpowder that will stabilize that bullet with that twist in that barrel you have.

Offline WNC

  • Trade Count: (0)
  • Member
  • *
  • Posts: 41
.54 Hawken w/ 1-48"twist and R.E.A.L b
« Reply #3 on: October 12, 2004, 12:26:23 PM »
Thomas...what powder charge did you get the best accuracy out of in your .54?
"I don't know 'nuttin 'bout 'chinery. Whatche shoot with that?"

Offline Thomas Krupinski

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 823
.54 Hawken w/ 1-48"twist and R.E.A.L b
« Reply #4 on: October 12, 2004, 12:37:29 PM »
It's been quite a while since I have used that load I really don't remember the charge.  I do remember that I was shooting Elephant brand FFg, but the exact charge that worked the best, I really can't remember.  The REALs were finger lubed with Bore Butter and I think the cap was CCI regular.  

However I do remember a 50 yard three shot group that all were touching with that combination.  Just start with the suggested load that comes with the mould and then adjust for accuracy from there.  Everyone's barrel is a bit different and you just have to try till you find the combinations that yours likes.  Just like barrels, each lot of blackpowder is also a tad different and it's just experimentation.

Offline lonewolf5347

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 219
REAL IN THE 1 IN 48 TWIST T/C
« Reply #5 on: October 13, 2004, 01:27:31 AM »
wnc: I shoot the REAL in both my t/c flinter 50 cal and my 54 cal. New Englander ,in the new englander with the same 1 in 48 twist I use 380 grain REAL with a wad and 80 grains 0f 3f goex black powder ,it will clover leaf the groups at the50 yard tarGet and the 100 it stays inside a softball group .
I ALSO USE THE 320 real IN THE FLINTER AND THE SAME POWDER CHARGE OF 80 GRAINS

Offline lonewolf5347

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 219
REALS CONICAL
« Reply #6 on: October 13, 2004, 01:38:31 AM »
ncncc: I do not cast my own REAL but do puchase them from a guy that cast them in FLA. his name is black jack hill and sell on e bay his price is 50 rounds plus ahipping think it is around $11.00 bucks
I just purchase a thompson center Renegade kit that was made in the early 80's which is a flinter sitting in a guys basement for a long time ,I will stuff the REA:L down that barrel if it is a 1 in 48 twist.
I can't wate to see what it look like I will leave it for a winter project and finish the metal in brown. :D  :D  :D  
I think we never grow up seem I can't waite to see the gun

Offline WNC

  • Trade Count: (0)
  • Member
  • *
  • Posts: 41
.54 Hawken w/ 1-48"twist and R.E.A.L b
« Reply #7 on: October 13, 2004, 01:44:31 AM »
Lonewolf, I think he picked up the REAL bullets from the same guy you're talking about. I think I might give a couple of them a try and see how they do in my renegade :-)


Thanks again
"I don't know 'nuttin 'bout 'chinery. Whatche shoot with that?"

Offline lonewolf5347

  • Trade Count: (0)
  • Avid Poster
  • **
  • Posts: 219
t/c 1` in 48 twist
« Reply #8 on: October 14, 2004, 06:30:11 AM »
wnc if you would like to try some I will be glad to send you some would need you mailing address
I have two different hardness soft and hard in the reals you are weclome to try them if you like :D  :D

Offline WNC

  • Trade Count: (0)
  • Member
  • *
  • Posts: 41
.54 Hawken w/ 1-48"twist and R.E.A.L b
« Reply #9 on: October 14, 2004, 06:41:32 AM »
Just sent you a PM Lonewolf :D
"I don't know 'nuttin 'bout 'chinery. Whatche shoot with that?"