« previous next »
Pages: [1]   Go Down

Author Topic: what are these?  (Read 873 times)

0 Members and 1 Guest are viewing this topic.

Offline frank405

  • Trade Count: (0)
  • Member
  • *
  • Posts: 70
what are these?
« on: April 13, 2004, 04:36:32 AM »
I have a bunch of lead(?) cylinders 4 inches tall, 3 inches in diameter, and a 1 inch hole in the center. I guess these are some sort of hospital thingy for radioactive material. Does anyone know what the lead composition is?
Logged

Offline MSP Ret

  • GBO Supporter
  • Trade Count: (173)
  • Senior Member
  • *****
  • Posts: 8940
  • Gender: Male
what are these?
« Reply #1 on: April 13, 2004, 03:49:54 PM »
Have you run them by a gieger counter or do they glow in the dark?....<><.... :wink:
Logged
"Giving up your gun to someone else on demand is called surrender. It means that you have given up your ability to protect yourself to a power that is greater than you." - David Yeagley

Offline Cactus Cris

  • Trade Count: (0)
  • Member
  • *
  • Posts: 91
what are these?
« Reply #2 on: April 13, 2004, 03:59:28 PM »
Just a guess-  but they (whom ever used them) would have no reason to spec anything but pure lead.  Everything else adds to the cost and would serve no purpose.  IE--tin, zinc, antimony etc.
Logged
Cactus Cris  SASS 2790  Darkside Posse, Cart maker, Corral Keeper, Gpa of 6

Offline Lloyd Smale

  • Moderators
  • Trade Count: (32)
  • Senior Member
  • *****
  • Posts: 18269
what are these?
« Reply #3 on: April 13, 2004, 11:05:11 PM »
most xray lead is pure with just a touch of antimony. Pretty much can be used as pure
Logged
blue lives matter

Offline frank405

  • Trade Count: (0)
  • Member
  • *
  • Posts: 70
????????????
« Reply #4 on: April 14, 2004, 05:17:17 AM »
My "test" so far is to drop them on the shop floor. They make a nice ring which tells me they are not pure lead. I guess I'll make some bullets out of them and see what BHN they end up and how the stuff shoots.
 Thanks for the ideas.
Logged

Offline kapnkid

  • Trade Count: (0)
  • Member
  • *
  • Posts: 7
what are these?
« Reply #5 on: October 22, 2004, 01:58:40 PM »
Some radioactive source shields are made of depleted Uranium. It's heavier than Lead ,  stronger and smaller.  I wouldn't advise trying to melt one.
Logged

Offline Flash

  • Trade Count: (82)
  • Senior Member
  • *****
  • Posts: 2285
  • Gender: Male
what are these?
« Reply #6 on: October 22, 2004, 03:04:38 PM »
If you got them from a hospital, they were most likely used in radiology. If you got them anywhere else, you'll have to narrow it down by that origin. You say cylinders? Do they have holes on both ends? If they're containers, they won't allow radition to penetrate. Kind of useless in radiology, unless you place your testicles in one during an xray. If they ring when dropped, I would say trash them. They could have been used for counter weights of some kind and not for radiology at all.
Logged
What doesn't kill us, makes us stronger!

Offline jhalcott

  • Trade Count: (1)
  • Senior Member
  • *****
  • Posts: 1869
what are these?
« Reply #7 on: October 22, 2004, 03:17:06 PM »
pure lead would give you a "thud" and deform a lot when dropped. Radioactive containers should look like thick cans AND should come with paper work certifying they are "clean" If these are hollow tubes they most likely are zinc type counter weights.Zinc will screw your pot up.I HAVE used zinc and aluminum to cast bullets,so it can be done! It just ain't worth the hassle.
Logged

Offline frank405

  • Trade Count: (0)
  • Member
  • *
  • Posts: 70
lead things
« Reply #8 on: October 23, 2004, 12:45:33 PM »
I have since used these up, added two every time I alloyed a batch of 300 pounds. Probably won't matter much in the long run, bullets shoot great anyway. Thanks for the info.
Logged
Pages: [1]   Go Up
« previous next »