« previous next »
Pages: [1]   Go Down

Author Topic: New NEF Junkie  (Read 809 times)

0 Members and 1 Guest are viewing this topic.

Offline c_latrans

  • Trade Count: (0)
  • Member
  • *
  • Posts: 38
  • Gender: Male
New NEF Junkie
« on: November 09, 2004, 05:53:39 AM »
I've had a Handi rifle in 45-70 for about a year and a half now but have,nt shot it much.  I've lurked around here for a few months soaking up advice.  Two weeks ago i officially became hooked.  A local gun store had a used SB2 with survivor stock and stainless barrel and receiver chambered for 357 mag for $145.  Needless to say I can resist anything except temptation.  My 15 year old son and I have had this out to the range for the past 2 weekends, and there are now 2 new NEF junkies in the world.  I may have to find another so that I have one to shoot.  It's a good thing that I cast bullets, cause all I have to buy is powder and primers.  This makes it almost as cheap to shoot as a 22.  Now I just have to save my pennies so that I can get barrels in 44 mag, 30-30 and 22 hornet.  I have molds to cast for all these as well.  The wife sure insn't going to be happy about this.  Best wishes to all.  Dale :-D
Logged
It sucks to grow old, but it's still better than dying young!

Offline Joel

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 933
New NEF Junkie
« Reply #1 on: November 09, 2004, 06:10:00 AM »
Welcome aboard Dale.  Bunch of hopeless addicts here.....haven't found any 12 step programs that seem to cure us of our need for more and more calibers, sights, stocks. Sigh.  Only time I say the Serenity Prayer is when I big 8-point come sneakin' along, and I need to calm down some.
Logged

Offline v8r

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 401
  • Gender: Male
New NEF Junkie
« Reply #2 on: November 09, 2004, 07:30:23 AM »
:D Welcome.You must have a oddball rifle.I have never seen a .357 in stainless before,was this a option i did not know about?All you Handi gurus enlighten me if you would.
Logged
V8r's Handi collection.
H&R Ultra Varmint .223
H&R Topper 158 .22 Hornet
H&R Classic Carbine .45 LC
NEF  .357 magnum
H&R "Golden Buffalo" Buffalo Classic 45-70
NEF Pardner !2 Gauge

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
New NEF Junkie
« Reply #3 on: November 09, 2004, 08:26:41 AM »
:D Welcome to the board, Dale! I'm new to the Handi Rifles, too, and these fellas will help you out for sure, and maybe we'll even learn a thing or 2 from you.  :wink:

Tim
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Nuttinbutchunks

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 443
New NEF Junkie
« Reply #4 on: November 09, 2004, 08:35:12 AM »
The wife should be grateful you're not hooked on Weatherby's  :)

That's the great thing about these little rifles. You can just buy barrels for them instead of the whole gun.  :grin:

I own a .17 HMR and a now .243 (was .44 mag). They're a blast to shoot. Welcome to the club.  :D
Logged
Ohhhh, I hate when that happens :eek:

Offline Nixter

  • Trade Count: (1)
  • Contributor
  • ***
  • Posts: 465
  • Gender: Male
welcome
« Reply #5 on: November 09, 2004, 09:26:45 AM »
Dale, welcome to our little part of the internet. Lots of knowledgeable folks here to answer your Handi-Questions. But alas, no one to cure your Handi-itis.

Here is a pic of my newly acquired stainless Handi in .357 Mag.

Again, welcome to Graybeards.
http://www.graybeardoutdoors.com/phpbb2/album_pic.php?pic_id=380

Nixter
Logged

Offline quickdtoo

  • Global Moderator
  • Trade Count: (149)
  • Senior Member
  • *****
  • Posts: 43301
  • Gender: Male
New NEF Junkie
« Reply #6 on: November 09, 2004, 09:47:58 AM »
Nice looking Handi, Nixter!  Makes me want another one!!! :roll:
Logged
"Always do right, this will gratify some and astonish the rest" -  Mark Twain

Offline Leftoverdj

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 1398
New NEF Junkie
« Reply #7 on: November 09, 2004, 10:16:23 AM »
Dale, lotta us here shooting .357s both Mags and Maxed. Several of us casting for them. I will warn you that when you go for more than plinking velocities, you have to go to GC bullets.

Welcome aboard and please share what moulds you have. You might also check in at the Cast Bullet forum.
Logged
It is the duty of the good citizen to love his country and hate his gubmint.

Offline c_latrans

  • Trade Count: (0)
  • Member
  • *
  • Posts: 38
  • Gender: Male
New NEF Junkie
« Reply #8 on: November 09, 2004, 05:06:34 PM »
Thank you all for the warm welcome.

Nixter;  My rifle looks like yours, but I have the pistol grip style survivor buttstock.

Leftoverdj;  I've always figured that plain base bullets were good up to about 1600 fps and gas checks from there up to about 2200.  Does this agree with your information??
Bullet molds I'm, currently using are as follows.
Lee;     30 cal 160 and 180 grain round nose
           358 148gr wadcutter
                 140 grain semi wadcutter
           429 240 grain semi wad cutter
                 240 grain semi wad cutter hollow point
           457 405 grain flat point
                 405 grain flat point hollow point
RCBS  44-245-SWC
Ideal   358 439     158 grain swc hollow point
Lyman 252435      22 cal 50 grain round nose
          358315      204 grain round nose

I also have several round ball molds that I use mostly for sling shot ammo and several molds for jigs and split shot.  I think that about covers it.
 Again thanks all for the welcome.  Dale  :D
Logged
It sucks to grow old, but it's still better than dying young!

Offline De41mag

  • Trade Count: (0)
  • A Real Regular
  • ****
  • Posts: 688
    • De41mag@aol.com
New NEF Junkie
« Reply #9 on: November 09, 2004, 05:49:07 PM »
Dale;

Welcome to our house. Sorry for the belated welcome, been a little under the weather. As you can see from the amount of posts we do a lot of talking around here. From my experience, these guys will help you with any questions you have on these rifles. They are a great bunch of fellas.  :grin:
Good Shooting.

Dennis  :D
Logged

Offline single shot shooter

  • Trade Count: (0)
  • Contributor
  • ***
  • Posts: 413
New NEF Junkie
« Reply #10 on: November 10, 2004, 06:31:52 AM »
welcome...
 i've been having some problems with my computer or else i would have welcomed you sooner. I too am new to the game. i'm getting my tracker 2 custom slugger back from the smith today (needed the front sight re-installed) and am still waiting for my .44 mag handi to come in and the shop. have fun. there are lots'o'great people here.
Logged
Single Shot Shooter  :D
______________________________________________________________________
It aint what ya shoot, Its how well ya shoot it

Rossi, The Best In Workin Mans Single Shots
Pages: [1]   Go Up
« previous next »