Author Topic: Winchester .22 Model 190 (Read 1092 times)

clarkg4867 · « **on:** September 13, 2004, 03:23:42 PM »

Does anybody know a web page where I can learn how to dissassemble and reassemble this model gun

pinduck · « **Reply #1 on:** September 13, 2004, 03:32:15 PM »

Here is a blowup of it showing parts http://www.e-gunparts.com/productschem.asp?chrMasterModel=0950z190

STL Cardinal Fan · « **Reply #2 on:** September 29, 2004, 08:53:03 AM »

Most folks are intimidated when it comes to tearing down a gun. Wjat I have done over the years is read and look at schematics also. What I also now use, is a digital camera and take pics of each step.......then all one has to do is go back and look at the pics to re-assemble.....

good luck........those ole 1890 are so nice!

Kenny

exfire · « **Reply #3 on:** November 10, 2004, 06:51:43 AM »

This is my first post. After stumbling onto this site and having some experience with the Win. M190 (and 290) I thought I'd put my 2c worth in. Being a tinkerer, I've had occasion to try to figure out problems with various firearms and have found J.B. Wood's "Take Down and Reassembly Guides" to be an invaluable resource. A friend once gave me a Win M190 to look at because it was going full-auto on him. It turns out that a relative thought he could improve the trigger pull by filing the top lobe on the hammer. After some investigation, I figured out the problem, and with the help of the photos I built up the hump with some weld, recontoured it until it functioned and put it all back together. Another instance found me with a Rem Nylon 66 with a broken bolt handle which I was able to repair with the help of the "Guide" but I'LL Post that story following another post I saw requesting parts info for the Nylon 66.