Author Topic: 1895 CB Recoil Question  (Read 720 times)

0 Members and 1 Guest are viewing this topic.

Offline parkinsonsd

  • Trade Count: (0)
  • Member
  • *
  • Posts: 44
1895 CB Recoil Question
« on: November 23, 2004, 08:58:31 AM »
I am purchasing this gun without having fired it.  Possibly a dumb move, but what the heck.

I was curious as to recoil.  Currently, I can handle around 40 rounds through my 870 Wingmaster 12 ga. with lightfield 2 3/4 slugs.

Are factory loads (i.e. Remington or Winchester) comparable in recoil?  And how about Garrett loads.  I'd appreciate any information anyone coud give me.

Thanks.
um, er, yeah.  okay.

Offline BigBrass

  • Trade Count: (0)
  • Member
  • *
  • Posts: 30
1895 CB Recoil Question
« Reply #1 on: November 23, 2004, 09:23:31 AM »
I handload for my 1895 CB; but I have shot the Remington factory loads, and to me the recoil of those Remington factory cartridges seemed  to be less than that of my 12-gauge shotgun.  I haven't fired the Garrett loads, which I understand are hotter; but I do fire handloads that are comparable to the Garretts.  The recoil from my handloads is somewhat stiffer than on my 12-gauge.  If you want to shoot the Garrett loads, you might want to consider having a soft recoil pad installed on the rifle, or else use a shoulder pad.

Offline Graybeard

  • Administrator
  • Trade Count: (69)
  • Senior Member
  • *****
  • Posts: 26944
  • Gender: Male
1895 CB Recoil Question
« Reply #2 on: November 23, 2004, 10:21:34 AM »
With CAS level loads it is very pleasant. With the likes of Garrett or Buffalo Bore loads or reloads of that magnitude recoil is seriously wicked. Even with the Pachmayr Decelerator pad it was far more than I could stand. I sold mine after firing fewer than 10 rounds of the Buffalo Bore ammo thru it. In retrospect I wish I had kept it and just used CAS level loads as they were very mild and are plenty for deer.


Bill aka the Graybeard
President, Graybeard Outdoor Enterprises
256-435-1125

I am not a lawyer and do not give legal advice.

Jesus is the way, the truth, and the life anyone who believes in Him will have everlasting life!

Offline victorcharlie

  • Trade Count: (0)
  • Senior Member
  • *****
  • Posts: 3573
1895 CB Recoil Question
« Reply #3 on: November 23, 2004, 04:47:50 PM »
Yes, the factory remington 405 grain loads aren't to bad.  The +p is fairly unpleasant, but tolerable, unlike greybeard, I don't have a bad shoulder.  My plans when I bought the rifle were to load it down some, but the accuracy of some of the +p ammo is so good it's hard to change especially with the hunting season on us.   Certainly factory ammo will do the job on anything I want to do with it and really accurate loads with less recoil are in my future.  I did put a simms limbsaver on my 1895 and highly recommend adding some sort of good recoil pad.  One thing for sure, when I show up at the range with it, the gun gets most peoples attention.  Buying ammo is also hilarious.."you  going bear hunting?"

You don't know how many times some one at the range has told me they've always wanted a 45.70...............it's a very fun gun to shoot and is quickly becoming my favorite........
"Extremism in the defense of liberty is no vice. Tolerance in the face of tyranny is no virtue."
Barry Goldwater

Offline Mac11700

  • GBO Supporter
  • Trade Count: (34)
  • Senior Member
  • *****
  • Posts: 6875
1895 CB Recoil Question
« Reply #4 on: November 23, 2004, 07:28:50 PM »
parkinsonsd:

It's no where near the level of those lightfeild slugs...even with the Garrets loadings...but..you might want to condider a nice recoil pad for it...I bought a small leather slip-on  velcro close Galco pad...not only does it look great...but really tames the recoil down a-lot...I put a small piece of foam inside to make up the difference in the curved plastic butt plate on it...I didn't have to alter the stock any...

Mac
You can cry me a river... but...build me a bridge and then get over it...

Offline parkinsonsd

  • Trade Count: (0)
  • Member
  • *
  • Posts: 44
1895 CB Recoil Question
« Reply #5 on: November 24, 2004, 05:14:58 AM »
Thanks for your replies.  I live in lower Michigan and really the only gun I "need" is my shotgun.  But I ain't buying this one for needs I'm buying it for fun.  I sincerely appreciate all your help.

Parker.
um, er, yeah.  okay.