Author Topic: 44 magnum reloading question (Read 483 times)

Bounty Hunter · « **on:** November 20, 2004, 01:49:29 PM »

I have a Marlin 1894SS in 44 cal. I have been reloading Speer 240 gr .429 diameter jacketed bullets only. Question: If I start shooting Hornady XTP jacketed bullets which are .430 in diameter will I be able to go back to the .429 diameter jacketed bullets??? Will accuracy be affected either way??? In other words, can I shoot both .429 diameter and .430 diameter jacketed bullets in the same gun with no loss of accuracy???

Many thanks!!!!
BH

ricciardelli · « **Reply #1 on:** November 20, 2004, 07:36:39 PM »

Swapping between .429 and .430 bullets will not "damage" the rifling, if that is what you are asking.

As for accuracy, any time you change ANYTHING, accuracy will change.

Flash · « **Reply #2 on:** November 21, 2004, 01:13:15 AM »

You may not want to load up to the maximum with the .430 bullets, especially if they'll occasionally be shot out of a handgun. Copper offers less resistance than steel so the bullet difference won't make a difference

jd45 · « **Reply #3 on:** November 21, 2004, 03:10:12 AM »

Ditto what Steve said regarding a change in components effecting accuracy. It may be helpful to slug your bore to see what the actual groove diameter is & match the jacketed bullets to it. Every gun has combos it likes, & combos it doesn't. If you take a notion to try cast bullets, I think it would be safe to go .001" over groove dia. jd45.